banner

GJYXFFCH Aramid Drop Fiber Cable

GJYXFFCH cable takes the colored fiber (single mode or multi-mode fiber) as the signal transmission unit, and the two sides of the cable are respectively placed with a non-metal reinforcement to form a square structure. At the same time, the high strength aramid yarn is used as the reinforcement to play a self-supporting overhead effect, and on this basis, a flame retardant polyolefin material is extruded to form a outer sheath.

Product Name: FTTH Cable GJYXFFCH
Fiber Type: G652D, G657A1, G657A2
Fiber Core: 1-2 Core

Application:·
· Self-supporting cable can span within 50m in mountain or hilly areas ;
· It can meet the requirement of pole and line laying with a certain span,  and the distance is longer than that of ordinary self-supporting leather cable ;
· Has high cost performance, widely  used in FTTH home-entry .

Description
Specification
Package & Shipping
Factory Show
Leave Your Feedback

Cable Structure:

https://www.gl-fiber.com/gjyxffch-aramid-drop-fiber-cable.html

Main Features :

·The outer diameter of the product  is small. Compared with the traditional self-supporting outdoor 8-figure cable,  the weight is lighter and the installation is more convenient ;
·It has high pressure resistance and  tensile, and can stand a  certain wind speed ;
·Specific V-shaped cable is  convenient for stripping and field installation ;
·The outer sheath is made of  flame retardant material, which can meet the requirements of flame retardant  grade and environmental performance of outdoor optical cable .

Product Application:

· Self-supporting cable can span within 50m in mountain or hilly areas ;
· It can meet the requirement of pole and line laying with a certain span,  and the distance is longer than that of ordinary self-supporting leather cable ;
· Has high cost performance, widely  used in FTTH home-entry .

Product Standard:

· YDT 1997.1-2014 Access optic-fiber cables for communications - Part 1: Butterfly optical cables, IEC-60332 standard.

Optical Characteristics:
    G.652 G.657 50/125μm 62.5/125μm
 Attenuation 
        (+20℃)
@850nm  -   - ≤3.5dB/km ≤3.5dB/km
@1300nm   -   - ≤1.5dB/km ≤1.5dB/km
@1310nm ≤0.34dB/km ≤0.34dB/km   -   -
@1550nm ≤0.22dB/km ≤0.22dB/km  -    -
Bandwidth
      (Class A)
@850  -   -  ≥500MHZ·km ≥200MHZ·km
@1300   -   - ≥1000MHZ·km ≥600MHZ·km
Numerical    aperture  -    -   - 0.200±0.015NA 0.275±0.015NA
Cable Cutoff    Wavelength  -  ≤1260nm ≤1260nm   -  -

Cable Parameter:

      Fiber Count       Cable Diameter
      mm
      Cable Weight
      Kg/km
      Tensile Strength 
      Long/Short Term
      N
      Crush Resistance  
      Long/Short Term
      N/100m
      Bending Radius 
      Static/Dynamic
      mm
1~2 core 2.5*5.65 19.4 500/1000 1000/2200 30D/15D

Environmental Performance:

Transport temperature

-40℃~+70℃
Storage temperature -40℃~+70℃
Write your message here and send it to us

Optical Characteristics:

    G.652 G.657 50/125μm 62.5/125μm
 Attenuation 
        (+20℃)
@850nm  -   - ≤3.5dB/km ≤3.5dB/km
@1300nm   -   - ≤1.5dB/km ≤1.5dB/km
@1310nm ≤0.34dB/km ≤0.34dB/km   -   -
@1550nm ≤0.22dB/km ≤0.22dB/km  -    -
Bandwidth
      (Class A)
@850  -   -  ≥500MHZ·km ≥200MHZ·km
@1300   -   - ≥1000MHZ·km ≥600MHZ·km
Numerical    aperture  -    -   - 0.200±0.015NA 0.275±0.015NA
Cable Cutoff    Wavelength  -  ≤1260nm ≤1260nm   -  -

Cable Parameter:

      Fiber Count       Cable Diameter
      mm
      Cable Weight
      Kg/km
      Tensile Strength 
      Long/Short Term
      N
      Crush Resistance  
      Long/Short Term
      N/100m
      Bending Radius 
      Static/Dynamic
      mm
1~2 core 2.5*5.65 19.4 500/1000 1000/2200 30D/15D

Environmental Performance:

Transport temperature

-40℃~+70℃
Storage temperature -40℃~+70℃

https://www.gl-fiber.com/products-ftth-drop-cable/

Packing Material:

Non-returnable wooden drum.
Both ends of the fiber optic cables are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3,000m±2%;

Cable printing: 

The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

1. Cable type and number of optical fiber
2. Manufacturer name
3. Month and Year of Manufacture
4. Cable length

Drum marking:  

Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

1. Manufacture name and logo
2. Cable length
3. Fiber cable types and number of fibers,etc
4. Rollway
5. Gross and net weight

Port:
Shanghai/Guangzhou/Shenzhen

Lead Time:
Quantity(KM) 1-300 ≥300
Est.Time(Days) 15 To be begotiated!
Package of FTTH Drop Cable
No Item Index
Outdoor Drop Cable Indoor Drop Cable Flat Drop Cable
1 Length and packaging 1000m/Plywood Reel 1000m/Plywood Reel 1000m/Plywood Reel
2 Plywood reel size 250×110×190mm 250×110×190mm 300×110×230mm
3 Carton size 260×260×210mm 260×260×210mm 360×360×240mm
4 Net weight 21 kg/km 8.0 kg/km 20 kg/km
5 Gross weight 23 kg/Box 9.0 kg/Box 21.5 kg/Box

Package & Shipping:

How to choose an economical and practical cable drum packaging to drop cable? Especially in some countries with rainy weather like Ecuador and Venezuela, Professional FOC manufacturers recommend that you use the PVC inner drum to protect the FTTH Drop Cable. This drum is fixed to the reel by 4 screws , Its’ advantage is drums are not afraid of rains & the cable winding is not easy to loosen. The following are the construction pictures fed back by our end customers. After the installation is completed, the reel is still firm and intact. 
https://www.gl-fiber.com/products-ftth-drop-cable/

Optical Cable Factory

In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.

GL  Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach  1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

Send your message to us:

Write your message here and send it to us