United states (English)
Our International Exhibition
OPGW Hardware Fittings
ADSS Hardware Fittings
TACIR & ZTACIR Conductor
FTTH Drop Fiber Optic Cable
FTTH Drop Cable
Outdoor Fiber Optic Cable
Figure 8 Fiber Optic Cable
Aerial Optical Cable
Direct Buried Fiber Cable
Duct Fiber Cable
Armored Fiber Cable
Optical Fiber Ribbon Cable
Indoor Fiber Optic Cable
Special Fiber Optic Cable
Anti Rodent Optical Cable
Air-blown Micro Cables
Air Blowing Micro Cable
Micro Module Cable
EPFU/Air Blown Fiber Unit (ABF )
SFU Micro Duct Cable
News & Solutions
Be Our Partner
News & Solutions
1100Km Drop Cable Promotion Sale
by admin on 22-09-24
Product Name: 1 Core G657A1 Drop Cable LSZH Jacket with Steel Wire Strength Member 1 Core G657A1 Drop Cable, Black Lszh Jacket, 1*1.0mm Phosphate Steel Wire Messenger, 2*0.4mm Phosphate Steel Wire Strength Member, 2*5.0mm Cable Diameter, 1Km/Reel, Square Corner, Cable Diameter to Make Positive To...
ADSS Cable Transportation Precautions
by admin on 22-09-13
To analyze the matters needing attention in the transportation of ADSS optical cable, the following points are shared by GL optical cable manufacturers; 1. After the ADSS optical cable has passed the single-reel inspection, it will be transported to the branches of each construction unit. 2. When...
What should be considered for ADSS cable suspension points?
by admin on 22-09-09
What should be considered for ADSS cable suspension points? (1) The ADSS optical cable "dances" with the high-voltage power line, and its surface is required to be able to withstand the test of high-voltage and strong electric field environment for a long time in addition to being resistant to ul...
The difference between ADSS and OPGW fiber optic cable
by admin on 22-09-03
Do you want to understand the difference between ADSS optical cable and OPGW optical cable? you must know the definition of these two optical cables and what are their main uses. ADSS is more powerful and is a self-supporting fiber optic cable that can transmit power from one place to another wit...
How To Improve The Thermal Stability Of OPGW Cable?
by admin on 22-08-19
Today, GL talks about common measures on how to improve the thermal stability of OPGW cables: 1. The shunt line method The price of OPGW optical cable is very high, and it is not economical to only increase the cross-section to bear the short-circuit current. It is commonly used to set up a light...
3220KM FTTH Drop Cable Exported To Azerbaijan Today
by admin on 22-08-12
Project Name: Optic Fiber Cable in Azerbaijan Date: 12th, August, 2022 Project Site: Azerbaijan Quantity and Specific Configuration: Outdoor FTTH Drop Cable(2core)：2620KM Indoor FTTH Drop Cable(1 core): 600KM
Air-blown Fiber Optical Cable
by admin on 22-08-03
The miniature air-blown optical cable was first created by NKF optical cable company in the Netherlands. Because it greatly improves the utilization efficiency of pipe holes, it has many market applications in the world. In residential renovation projects, some areas may require optical cables to...
ADSS Wire Drawing Processes
by admin on 22-07-25
As Below is the brief introduction the Wire drawing of ADSS fiber optic cable 1. Bare fiber The smaller the fluctuation of the outer diameter of the ADSS optical fiber, the better. The fluctuation of the optical fiber diameter can cause the backscattering power loss and the fiber splicing loss o...
ADSS Cable Package and Construction Requirements
by admin on 22-07-22
ADSS Cable Package Requirements The distribution of optical cables is an important issue in the construction of optical cables. When the lines and conditions used are clarified, the distribution of the optical cable must be considered. The factors affecting the distribution are as follows: (1) Si...
Three common laying methods and requirements for outdoor optical cables
by admin on 22-07-13
Three common laying methods for outdoor optical cables are introduced, namely: pipeline laying, direct burial laying and overhead laying. The following will explain the laying methods and requirements of these three laying methods in detail. Pipe/Duct Laying Pipe laying is a widely used method in...
ADSS Cable Pole Accessories
by admin on 22-07-07
ADSS cable is also called all-dielectric self-supporting cable, and uses all-dielectric material. Self-supporting means that the reinforcing member of the optical cable itself can bear its own weight and external load. This name points out the use environment and key technology of this optical ca...
Enhanced Performance Fibre Unit (EPFU)
by admin on 22-06-30
Enhanced Performance Fibre Unit (EPFU) bundle fibre designed for blowing in ducts with an internal diameter of 3.5mm. Smaller fibre counts manufactured with a rough exterior coating to aid the performance of blowing allowing air capture on the surface of the fibre unit. Specifically engineered fo...
Three Common Laying Methods of Outdoor Optical Cables
by admin on 22-06-25
GL Fiber Optic Cable manufacturers will introduce three common laying methods for outdoor optical cables, namely: pipeline laying, direct burial laying and overhead laying. The following will explain the laying methods and requirements of these three laying methods in detail. 1. Pipe/Duct laying ...
Supply, Delivery Installation and Commission of 700KM ADSS Fibre Optic Cable to Ecuador
by admin on 22-06-15
Project Name: Optic Fiber Cable in Ecuador Date: 12th, August, 2022 Project Site: Quito, Ecuador Quantity and Specific Configuration: ADSS 120m Span：700KM ASU-100m Span：452KM Outdoor FTTH Drop Cable(2core)：1200KM Description: For Distribution Substation in the central, North East and North W...
Basic Requirements for Storage Optical Cables
by admin on 22-06-10
What are the basic requirements for storage optical cables? As an optical cable manufacturer with 18 years of production and export experience, GL will tell you the requirements and skills for storaging fiber optic cables. 1. Sealed storage The label on the fiber optic cable reel must be seale...
Introduction of Air-Blown Micro Optical Fiber Cable
by admin on 22-06-02
Today, we mainly introduce Air-Blown Micro Optical Fiber Cable for FTTx Network. Compared with optical cables laid in the traditional ways, air-blown micro cables have the following merits: ● It improves duct utilization and increases fibre density The technology of air-blown micro ducts and mic...
What is the difference between a 250μm loose-tube cable and a 900μm tight-tube cable?
by admin on 22-05-26
What is the difference between a 250μm loose-tube cable and a 900μm tight-tube cable? The 250µm loose-tube cable and the 900µm tight-tube cable are two different types of cables with the same diameter core, cladding, and coating. However, there are still differences between the two, which are emb...
The Difference Between GYXTW53, GYTY53, GYTA53Cable
by admin on 22-05-20
GYXTW53 structure: "GY" outdoor fiber optic cable, "x" central bundled tube structure, "T" ointment filling, "W" steel tape longitudinally wrapped + PE polyethylene sheath with 2 parallel steel wires. "53" steel With armor + PE polyethylene sheath. Central bundled double-armoured and double-sheat...
The Difference Between GYFTY and GYFTA/GYFTS Cable
by admin on 22-05-13
Generally, there are three types of non-metallic overhead fiber optic cables, GYFTY, GYFTS, and GYFTA. GYFTA is a non-metal reinforced core, aluminum armored fiber optic cable. GYFTS is a non-metal reinforced core, steel armored fiber optic cable. The GYFTY fiber optic cable adopts a loose-layer ...
Three-point Grounding of OPGW Cable
by admin on 22-05-06
OPGW optical cable is mainly used on 500KV, 220KV, 110KV voltage level lines, and is mostly used on new lines due to line power failure, safety and other factors. One end of the grounding wire of the OPGW optical cable is connected to the parallel clip, and the other end is connected to the groun...
Page 1 / 8
Send your message to us:
Please fill the required field.
Please fill the required field.
Please fill the required field.
Write your message here and send it to us
Hit enter to search or ESC to close