GYFXTBY Non-Metallic Aerial Flat Drop Cable

Structure Design:

Key Features:

1. Accurately controlling the residual length of optical fiber ensures good tensile properties and temperature characteristics of optical cable
2. PBT loose tube material has good resistance to hydrolysis, filled with special ointment to protect the optical fiber
3. Fiber optic cable is non-metallic structure, light weight, easy laying, anti-electromagnetic, lightning protection effect is better
4. Larger number of core than ordinary butterfly-shaped optical cable products, suitable for access to more densely populated villages
5. Compared with butterfly-shaped optical cable, runway structure products have stable optical transmission performance with no risk of water accumulation, icing and egg cocoon
6. Easy to peel, reduce the time of pulling out the outer sheath, improve the construction efficiency
7. It has the advantages of corrosion resistance, UV protection and environmental protection

Standard:  YD / T769-2010, GB / T 9771-2008, IEC794 and other standards

Optical Characteristics:

How to choose an economical and practical cable drum packaging to drop cable?

Especially in some countries with rainy weather like Ecuador and Venezuela, Professional FOC manufacturers recommend that you use the PVC inner drum to protect the FTTH Drop Cable. This drum is fixed to the reel by 4 screws , Its’ advantage is drums are not afraid of rains & the cable winding is not easy to loosen. The following are the construction pictures fed back by our end customers. After the installation is completed, the reel is still firm and intact.

Meanwhile, we have 15 years mature logistic team, 100% meet your good safety and delivery time.

*The above is just a suggestion for container loading, please consult our sales department for the specific quantity.

Feedback: In order to meet the world’s highest quality standards, we continuously monitor feedback from our customers. For comments and suggestions, please, contact us, Email: [email protected].

Packing Material:

Non-returnable wooden drum.
Both ends of the fiber optic cables are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3，000m±2%;

Cable printing: 

The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

1. Cable type and number of optical fiber
2. Manufacturer name
3. Month and Year of Manufacture
4. Cable length

Drum marking:  

Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

1. Manufacture name and logo
2. Cable length
3. Fiber cable types and number of fibers,etc
4. Rollway
5. Gross and net weight

Port:
Shanghai/Guangzhou/Shenzhen

Lead Time: