banner

GYXTC8S Figure 8 Cable pẹlu Irin teepu

In the GYXTC8S cable,single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound.PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it.Then.this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure.

Productt Name: GYXTC8S Figure 8 Cable pẹlu Irin teepu

ohun elo: Ara atilẹyin eriali

1.High išẹ opitika nẹtiwọki ọna.
2.High iyara opitika ipa-ni ile (FTTX).
3.All orisi ti okun kebulu pẹlu o yatọ si ẹya.

 

Starting custom your ideal size By E-mail: inquiry@gl-fibercable.com

Apejuwe

sipesifikesonu

Package & Tansportation

ohun elo: Ara atilẹyin eriali
1.High išẹ opitika nẹtiwọki ọna.
2.High iyara opitika ipa-ni ile (FTTX).
3.All orisi ti okun kebulu pẹlu o yatọ si ẹya.

otutu Range :
Awọn ọna: -40 ℃ to + 70 ℃
Ibi: -40 ℃ to + 70 ℃

ti iwa:
1.Excellent darí ati otutu išẹ.
2.Critical protection to fibers.

awọn ajohunše :
Ni ibamu pẹlu awọn duro YD / T 1155-2001 bi daradara bi IEC60794-1.

Specification:

USB ka Out sheath
Diameter(MM)
àdánù
(KG/Km)
Minimum allowable
Tensile Strength(N)
Minimum allowable
Crush Load(N/100mm)
Minimum Bending
Radius(MM)
Ibi
temperature
(℃)
igba kukuru igba gígun igba kukuru igba gígun igba kukuru igba gígun
2 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
4 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
6 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
8 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
12 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60

ohun elo: Ara atilẹyin eriali
1.High išẹ opitika nẹtiwọki ọna.
2.High iyara opitika ipa-ni ile (FTTX).
3.All orisi ti okun kebulu pẹlu o yatọ si ẹya.

otutu Range :
Awọn ọna: -40 ℃ to + 70 ℃
Ibi: -40 ℃ to + 70 ℃

ti iwa:
1.Excellent darí ati otutu išẹ.
2.Critical protection to fibers.

awọn ajohunše :
Ni ibamu pẹlu awọn duro YD / T 1155-2001 bi daradara bi IEC60794-1.

Specification:

USB ka Out sheath
Diameter(MM)
àdánù
(KG/Km)
Minimum allowable
Tensile Strength(N)
Minimum allowable
Crush Load(N/100mm)
Minimum Bending
Radius(MM)
Ibi
temperature
(℃)
igba kukuru igba gígun igba kukuru igba gígun igba kukuru igba gígun
2 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
4 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
6 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
8 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
12 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60

Packing and Marking

  • Each single length of cable shall be reeled on Fumigated Wooden Drum
  • Covered by plastic buffer sheet
  • Sealed by strong wooden battens
  • At least 1 m of inside end of cable will be reserved for testing.
  • Drum length: Standard drum length is 3,000m±2%; as required
  • 5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
  • Manufacturing year and month Roll—direction arrow;
  • Drum length; Gross/net weight;

packaging and shipping2

Apoti & Ako

Apoti & Ako

Send your message to us:

Write your message here and send it to us