GYXTC8S Figure 8 Cable with Steel Tape

In the GYXTC8S cable,single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound.PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it.Then.this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure.

Product Name: Figure 8 Cable with Steel Tape

Cable Type: GYXTC8S

Application: Self supporting Aerial

1.High performance optical network operating.
2.High speed optical routes in buildings (FTTX).
3.All types of fiber cables with different structures.

Send email to us Open Whats App

Description

Specification

Package & Tansportation

Structure Design

Application: Self supporting Aerial
1.High performance optical network operating.
2.High speed optical routes in buildings (FTTX).
3.All types of fiber cables with different structures.

Temperature Range
Operating :-40℃ to +70℃
Storage :-40℃ to +70℃

Characteristic
1.Excellent mechanical and temperature performance.
2.Critical protection to fibers.

Standards
Comply with stand YD/T 1155-2001 as well as IEC60794-1.

Specification

Cable Count	Out sheath Diameter（MM)	Weight (KG/Km)	Minimum allowable Tensile Strength(N)		Minimum allowable Crush Load（N/100mm)		Minimum Bending Radius(MM)		Storage temperature （℃）
Cable Count	Out sheath Diameter（MM)	Weight (KG/Km)	short term	long term	short term	long term	short term	long term	Storage temperature （℃）
2	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60
4	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60
6	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60
8	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60
12	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60

How to Ensure the Quality and Performance of Your Fiber Optic Cable?

We control the products quality from the raw material to the finish produts All the raw material should be tested to match the Rohs standard when they arrived at our manufacture.We control the quality during the producing process by advanced technology and equipments. We test the finished products according to the test standard. Approved by various professional optical and communication product institution , GL also conduct various in-house testing in its own Laboratory and Test Center. We also conduct test with special arrangement with the Chinese Government Ministry of Quality Supervision & Inspection Center of Optical Communication Products(QSICO).

Quality Control - Test Equipment and Standard:

Feedback: In order to meet the world’s highest quality standards, we continuously monitor feedback from our customers. For comments and suggestions, please, contact us, Email: [email protected].

Write your message here and send it to us

Structure Design:

Application: Self supporting Aerial
1.High performance optical network operating.
2.High speed optical routes in buildings (FTTX).
3.All types of fiber cables with different structures.

Temperature Range:
Operating :-40℃ to +70℃
Storage :-40℃ to +70℃

Characteristic:
1.Excellent mechanical and temperature performance.
2.Critical protection to fibers.

Standards:
Comply with stand YD/T 1155-2001 as well as IEC60794-1.

Specification:

Cable Count	Out sheath Diameter（MM)	Weight (KG/Km)	Minimum allowable Tensile Strength(N)		Minimum allowable Crush Load（N/100mm)		Minimum Bending Radius(MM)		Storage temperature （℃）
Cable Count	Out sheath Diameter（MM)	Weight (KG/Km)	short term	long term	short term	long term	short term	long term	Storage temperature （℃）
2	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60
4	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60
6	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60
8	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60
12	3.8×5.5	52.00	1500	200	1200	200	20D	10D	-40+60

Packing and Marking

Each single length of cable shall be reeled on Fumigated Wooden Drum
Covered by plastic buffer sheet
Sealed by strong wooden battens
At least 1 m of inside end of cable will be reserved for testing.
Drum length: Standard drum length is 3，000m±2%; as required
5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
Manufacturing year and month Roll—direction arrow;
Drum length; Gross/net weight;