banner

GYTC8S Figure 8 Cable with Steel Tape

In the GYTC8S cable, single-mode/multimode fibers are positioned in the loose tubes, while the loose tubes strand together around metallic central strength member into a compact and circular cable core, and the water-blocking materials are distributed into interstices of it. After a PSP is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure.

Product Name: Figure-8 Cable with Steel Tape

Cable Type: GYTC8S

Application: Self supporting Aerial

1. High performance optical network operating.
2. High speed optical routes in buildings (FTTX).
3. All types of fiber cables with different structures.

Standards:
Comply with stand YD/T 901-2009 as well as IEC 60794-1

Description
Specification
Package & Shipping
Factory Show
Leave Your Feedback

Structure Design

https://www.gl-fiber.com/gytc8s-figure-8-cable-with-steel-tape.html

Application: Self supporting Aerial

1. High performance optical network operating.
2. High speed optical routes in buildings (FTTX).
3. All types of fiber cables with different structures.

Temperature Range

 Operating :-40℃ to +70℃ Storage :-40℃ to +70℃

Characteristic

1,Excellent mechanical and temperature performance. 2,Critical protection to fibers.

Standards

Comply with stand YD/T 901-2009 as well as IEC 60794-1

Optical Charactristics

               G.652 G.655 50/125μm 62.5/125μm    
Attenuation(+20℃) @850nm     ≤3.0 dB/km ≤3.0 dB/km
@1300nm     ≤1.0 dB/km ≤1.0 dB/km
@1310nm ≤0.36 dB/km ≤0.40 dB/km    
@1550nm ≤0.22 dB/km ≤0.23dB/km    
Bandwidth (Class A) @850nm     ≥500 MHz·km ≥200 MHz·km
@1300nm     ≥1000 MHz·km ≥600 MHz·km
Numerical Aperture     0.200±0.015NA 0.275±0.015NA
Cable Cut-off Wavelength  ≤1260nm ≤1480nm    

Technical Parameter

Fiber count   Cablediameter(mm)   Cableweight(kg/km)   Tension(N) Crush(N/100mm)  Bending radius(mm)
Long term Short term Long term Short term static Dynamic
2~30 9.5*19.1 160.0 2000 6000 300 1000 10D 20D
32~36 10.1*19.7 170.0 2000 6000 300 1000 10D 20D
38~60 10.8*20.4 180.0 2000 6000 300 1000 10D 20D
62~72 12.4*22.0 195.0 2000 6000 300 1000 10D 20D
74~96 13.1*22.7 222.0 2000 6000 300 1000 10D 20D
78~120 15.7*22.3 238.0 2000 6000 300 1000 10D 20D
122~144 15.5*25.1 273.0 2000 6000 300 1000 10D 20D

Noted
1,Only a part of Figure-8 Optical cables are listed in the table. Cables with other specifications can be inquired.
2,Cables can be supplied with a range of single mode or multimode fibers.
3,Specially designed Cable structure is available on request.

Packaging Details
1-5KM per roll. Packed by steel drum . Other packing available according to client`s Request.

Sheath mark
The following printing(white hot foil indentation)is applied at 1meter intervals.

 

Write your message here and send it to us

Structure Design

https://www.gl-fiber.com/gytc8s-figure-8-cable-with-steel-tape.html

Application: Self supporting Aerial

1. High performance optical network operating.
2. High speed optical routes in buildings (FTTX).
3. All types of fiber cables with different structures.

Temperature Range

 Operating :-40℃ to +70℃ Storage :-40℃ to +70℃

Characteristic

1,Excellent mechanical and temperature performance. 2,Critical protection to fibers.

Standards

Comply with stand YD/T 901-2009 as well as IEC 60794-1

Optical Charactristics

               G.652 G.655 50/125μm 62.5/125μm    
Attenuation(+20℃) @850nm     ≤3.0 dB/km ≤3.0 dB/km
@1300nm     ≤1.0 dB/km ≤1.0 dB/km
@1310nm ≤0.36 dB/km ≤0.40 dB/km    
@1550nm ≤0.22 dB/km ≤0.23dB/km    
Bandwidth (Class A) @850nm     ≥500 MHz·km ≥200 MHz·km
@1300nm     ≥1000 MHz·km ≥600 MHz·km
Numerical Aperture     0.200±0.015NA 0.275±0.015NA
Cable Cut-off Wavelength  ≤1260nm ≤1480nm    

Technical Parameter

Fiber count   Cablediameter(mm)   Cableweight(kg/km)   Tension(N) Crush(N/100mm)  Bending radius(mm)
Long term Short term Long term Short term static Dynamic
2~30 9.5*19.1 160.0 2000 6000 300 1000 10D 20D
32~36 10.1*19.7 170.0 2000 6000 300 1000 10D 20D
38~60 10.8*20.4 180.0 2000 6000 300 1000 10D 20D
62~72 12.4*22.0 195.0 2000 6000 300 1000 10D 20D
74~96 13.1*22.7 222.0 2000 6000 300 1000 10D 20D
78~120 15.7*22.3 238.0 2000 6000 300 1000 10D 20D
122~144 15.5*25.1 273.0 2000 6000 300 1000 10D 20D

Noted
1,Only a part of Figure-8 Optical cables are listed in the table. Cables with other specifications can be inquired.
2,Cables can be supplied with a range of single mode or multimode fibers.
3,Specially designed Cable structure is available on request.

Packaging Details
1-5KM per roll. Packed by steel drum . Other packing available according to client`s Request.

Sheath mark
The following printing(white hot foil indentation)is applied at 1meter intervals.

 

https://www.gl-fiber.com/products-outdoor-fiber-optic-cable/

Packing Material:

Non-returnable wooden drum.
Both ends of the fiber optic cables are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3,000m±2%;

Cable printing: 

The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

1. Cable type and number of optical fiber
2. Manufacturer name
3. Month and Year of Manufacture
4. Cable length

Drum marking:  

Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

1. Manufacture name and logo
2. Cable length
3. Fiber cable types and number of fibers,etc
4. Rollway
5. Gross and net weight

Port:
Shanghai/Guangzhou/Shenzhen

Lead Time:
Quantity(KM) 1-300 ≥300
Est.Time(Days) 15 To be begotiated!

 

 

Note:The Packing standard and details as above is estimated and final size & weight shall be confirmed before shipment.  

Remark:  The cables are packed in carton, coiled on Bakelite & steel drum. During transportation, right tools should be used to avoid damaging the package and to handle with ease. Cables should be protected from moisture,kept away from high temperature and fire sparks,protected from over bending and crushing,protected from mechanical stress and damage.

outdoor fiber cable

outdoor cable

 

<s

Optical Cable Factory

In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.

GL  Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach  1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

Send your message to us:

Write your message here and send it to us