banner

GYXTC8S Figura 8 Cable ma Azzar tape

In the GYXTC8S cable,single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound.PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it.Then.this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure.

Productt Name: GYXTC8S Figura 8 Cable ma Azzar tape

applikazzjoni: Awto-appoġġ Aerial

prestazzjoni 1.High netwerk ottiċi joperaw.
Veloċità rotot ottiċi 2.High f'bini (FTTX).
Tipi 3.ALL ta 'kejbils tal-fibra bi strutturi differenti.

 

Starting custom your ideal size By E-mail: inquiry@gl-fibercable.com

deskrizzjoni

speċifikazzjoni

Package & Tansportation

applikazzjoni: Awto-appoġġ Aerial
prestazzjoni 1.High netwerk ottiċi joperaw.
Veloċità rotot ottiċi 2.High f'bini (FTTX).
Tipi 3.ALL ta 'kejbils tal-fibra bi strutturi differenti.

tat-temperatura Firxa :
Operating: -40 ℃ għal + 70 ℃
ħażna: -40 ℃ għal + 70 ℃

karatteristika:
1.Excellent prestazzjoni mekkanika u t-temperatura.
2.Critical protection to fibers.

istandards :
Jikkonforma ma stand YD / T 1155-2001 kif ukoll IEC60794-1.

speċifikazzjoni:

Għadd kejbil Out sheath
Diameter(MM)
piż
(KG/Km)
Minimum allowable
Tensile Strength(N)
Minimum allowable
Crush Load(N/100mm)
Minimum Bending
Radius(MM)
Ħażna
temperature
(℃)
żmien qasir fit-tul żmien qasir fit-tul żmien qasir fit-tul
2 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
4 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
6 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
8 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
12 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60

applikazzjoni: Awto-appoġġ Aerial
prestazzjoni 1.High netwerk ottiċi joperaw.
Veloċità rotot ottiċi 2.High f'bini (FTTX).
Tipi 3.ALL ta 'kejbils tal-fibra bi strutturi differenti.

tat-temperatura Firxa :
Operating: -40 ℃ għal + 70 ℃
ħażna: -40 ℃ għal + 70 ℃

karatteristika:
1.Excellent prestazzjoni mekkanika u t-temperatura.
2.Critical protection to fibers.

istandards :
Jikkonforma ma stand YD / T 1155-2001 kif ukoll IEC60794-1.

speċifikazzjoni:

Għadd kejbil Out sheath
Diameter(MM)
piż
(KG/Km)
Minimum allowable
Tensile Strength(N)
Minimum allowable
Crush Load(N/100mm)
Minimum Bending
Radius(MM)
Ħażna
temperature
(℃)
żmien qasir fit-tul żmien qasir fit-tul żmien qasir fit-tul
2 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
4 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
6 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
8 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60
12 3.8×5.5 52.00 1500 200 1200 200 20D 10D -40+60

Packing and Marking

  • Each single length of cable shall be reeled on Fumigated Wooden Drum
  • Covered by plastic buffer sheet
  • Sealed by strong wooden battens
  • At least 1 m of inside end of cable will be reserved for testing.
  • Drum length: Standard drum length is 3,000m±2%; as required
  • 5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
  • Manufacturing year and month Roll—direction arrow;
  • Drum length; Gross/net weight;

packaging and shipping2

Ippakkettjar & Shipping

Ippakkettjar & Shipping

Send your message to us:

Write your message here and send it to us