GL Serat nyadiakeun jaket ganda ADSS Track-Tahan Cable dirancang pikeun aplikasi timer ngarojong pikeun kabel bentang nepi ka 1500m, sahingga hiji gampang jeung ongkos-éféktif hiji-hambalan instalasi ngagunakeun hardware baku sarta métode instalasi.
Track-tahan PE (TRPE) jaket ganda kalawan aditif ngajadikeun kabel tahan, awét sarta gampang strip, nyadiakeun panyalindungan unggulan ngalawan radiasi UV, jamur, abrasion jeung faktor lingkungan lianna. Sadia pikeun jalur transmisi tegangan tinggi pikeun rentang poténsi médan listrik handap: 12 kV mun 25 kV tur luhur ti 25 kV nepi ka 400 kV.
Metodeu SZ-stranded pikeun tabung leupas sareng opat ripcords mastikeun aksés pertengahan bentang anu gancang sareng gampang.
Anggota kakuatan sentral diéléktrik teu merlukeun beungkeutan atawa grounding.
Benang Aramid boga kinerja alus teuing ngalawan tegangan tinggi pikeun pamasangan langsung-hawa, hawa kana transisi saluran sarta bisa dipaké pikeun aplikasi sejenna nu merlukeun kinerja tensile ditambahkeun kayaning saluran panjang narik. Taya kabel utusan diperlukeun pikeun instalasi, tur euweuh komponén logam dipaké dina kabel ADSS. Atribut ieu ngamungkinkeun kabel dipasang langsung-garis sareng dina rohangan kakuatan jalur distribusi.
Jenis sareng sipat serat optik
| (Barang) | Unit | Spésifikasi | |
| G. 652 | |||
| Diaméter médan mode | 1310nm | mm | 9.2 ± 0.4 |
| 1550nm | mm | 10,4 ± 0,8 | |
| Diaméter cladding | mm | 125,0 ±1 | |
| Cladding non-circularity | % | £1.0 | |
| Kasalahan concentricity inti / cladding | mm | £0.5 | |
| Diaméter palapis | mm | 242 ± 7 | |
| Kasalahan concentricity palapis / cladding | mm | £12 | |
| Kabel cut-off panjang gelombang | nm | £ 1260 | |
| Koéfisién atenuasi | 1310nm | dB/km | £0.36 |
| 1550nm | dB/km | £0.22 | |
| Buktina tingkat stress | kpsi | ≥100 | |
ITU-T G.652 (Parameter séjén minuhan standar ITU-T G.652)
(Dimensi konstruksi kabel)
| bentang(m） | Jumlah serat | Struktur | Serat per tabung | Diaméter tabung leupas (mm) | diaméterna CSM / diaméterna pad (mm) | Ketebalan tina Jaket jero (mm) | Ketebalan tina jaket luar (mm) | kabel diaméterna(mm) | kabel beurat (kg/km) |
| 200 | 12 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.2±0.5 | 144 |
| 24 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.2±0.5 | 144 | |
| 36 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.2±0.5 | 145 | |
| 48 | 1+6 | 12 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.5±0.5 | 151 | |
| 96 | 1+8 | 12 | 2.5±0.1 | 3.4/4.3 | 0.9±0.1 | 1.7±0.1 | 14.8±0.5 | 187 |
| bentang(m） | Jumlah serat | Struktur | Serat per tabung | Diaméter tabung leupas (mm) | diaméterna CSM / diaméterna pad (mm) | Ketebalan tina Jaket jero (mm) | Ketebalan tina jaket luar (mm) | kabel diaméterna(mm) | kabel beurat (kg/km) |
| 300 | 12 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.3±0.5 | 145 |
| 24 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.3±0.5 | 146 | |
| 36 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.3±0.5 | 147 | |
| 48 | 1+6 | 12 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.6±0.5 | 154 | |
| 96 | 1+8 | 12 | 2.5±0.1 | 3.4/4.3 | 0.9±0.1 | 1.7±0.1 | 14.9±0.5 | 184 |
| bentang(m） | Jumlah serat
| Struktur | Serat per tabung | Diaméter tabung leupas (mm) | diaméterna CSM / diaméterna pad (mm) | Ketebalan tina Jaket jero (mm) | Ketebalan tina jaket luar (mm) | kabel diaméterna(mm) | kabel beurat (kg/km) |
| 400 | 12 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.6±0.5 | 151 |
| 24 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.6±0.5 | 152 | |
| 36 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.6±0.5 | 152 | |
| 48 | 1+6 | 12 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.9±0.5 | 160 | |
| 96 | 1+8 | 12 | 2.5±0.1 | 3.4/4.3 | 0.9±0.1 | 1.7±0.1 | 15.2±0.5 | 195 |
| bentang(m） | Jumlah serat | Struktur | Serat per tabung | Diaméter tabung leupas (mm) | diaméterna CSM / diaméterna pad (mm) | Ketebalan tina Jaket jero (mm) | Ketebalan tina jaket luar (mm) | kabel diaméterna(mm) | kabel beurat (kg/km) |
| 500 | 12 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.6±0.5 | 152 |
| 24 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.6±0.5 | 153 | |
| 36 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.6±0.5 | 153 | |
| 48 | 1+6 | 12 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 14.1±0.5 | 163 | |
| 96 | 1+8 | 12 | 2.5±0.1 | 3.4/4.3 | 0.9±0.1 | 1.7±0.1 | 15.4±0.5 | 198 |
| bentang(m） | Jumlah serat
| Struktur | Serat per tabung | Diaméter tabung leupas (mm) | diaméterna CSM / diaméterna pad (mm) | Ketebalan tina Jaket jero (mm) | Ketebalan tina jaket luar (mm) | kabel diaméterna(mm) | kabel beurat (kg/km) |
| 600 | 12 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.8±0.5 | 155 |
| 24 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.8±0.5 | 156 | |
| 36 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 13.8±0.5 | 157 | |
| 48 | 1+6 | 12 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 14.3±0.5 | 168 | |
| 96 | 1+8 | 12 | 2.5±0.1 | 3.4/4.3 | 0.9±0.1 | 1.7±0.1 | 15.5±0.5 | 201 |
| bentang(m） | Jumlah serat
| Struktur | Serat per tabung | Diaméter tabung leupas (mm) | diaméterna CSM / diaméterna pad (mm) | Ketebalan tina Jaket jero (mm) | Ketebalan tina jaket luar (mm) | kabel diaméterna(mm) | kabel beurat (kg/km) |
| 800 | 12 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 14.0±0.5 | 159 |
| 24 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 14.0±0.5 | 160 | |
| 36 | 1+6 | 6 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 14.0±0.5 | 161 | |
| 48 | 1+6 | 12 | 2.5±0.1 | 2.8/2.8 | 0.9±0.1 | 1.7±0.1 | 14.4±0.5 | 171 | |
| 96 | 1+8 | 12 | 2.5±0.1 | 3.4/4.3 | 0.9±0.1 | 1.7±0.1 | 15.8±0.5 | 209 |
| bentang(m） | Jumlah serat
| Struktur | Serat per tabung | Diaméter tabung leupas (mm) | diaméterna CSM / diaméterna pad (mm) | Ketebalan tina Jaket jero (mm) | Ketebalan tina jaket luar (mm) | kabel diaméterna(mm) | kabel beurat (kg/km) |
| 1000 | 12 | 1+6 | 6 | 3.0±0.1 | 3.0/3.0 | 0.9±0.1 | 1.7±0.1 | 15.1±0.5 | 187 |
| 24 | 1+6 | 6 | 3.0±0.1 | 3.0/3.0 | 0.9±0.1 | 1.7±0.1 | 15.1±0.5 | 187 | |
| 36 | 1+6 | 6 | 3.0±0.1 | 3.0/3.0 | 0.9±0.1 | 1.7±0.1 | 15.1±0.5 | 188 | |
| 48 | 1+6 | 12 | 3.0±0.1 | 3.0/3.0 | 0.9±0.1 | 1.7±0.1 | 15.5±0.5 | 196 | |
| 96 | 1+8 | 12 | 3.0±0.1 | 4.1/4.9 | 0.9±0.1 | 1.7±0.1 | 17.8±0.5 | 266 |
kinerja kabel
| (Barang) | (Parameter) | ||||
| tabung leupas | Bahan | PBT | |||
| Warna | Sadaya warna tampilan | ||||
| Pangeusi | Bahan | PE | |||
| Warna | Hideung | ||||
| CSM | Bahan | FRP | |||
| Jaket jero | Bahan | MDPE | |||
| Warna | Hideung | ||||
| Potongan bertulang non-logam | Bahan | Benang Aramid | |||
| Jaket luar | Bahan | AT | |||
| Warna | Hideung | ||||
| Min. radius bending | Statik | 12.5 kali diameter kabel | |||
| Dinamis | 25 kali diameter kabel | ||||
| Ngulang ngeluk | ngamuat:150N; jumlahsiklus:30 Taya tambahan atraatenuasi, euweuh putus serat sarta euweuh karuksakan kabel. | ||||
| kinerja Tensile | bentang | Inti | RTS (N) | MAT (N) | EDS (N) |
| 200 | 12 | 14700 | 6600 | 3670 | |
| 24 | 14700 | 6600 | 3670 | ||
| 36 | 14700 | 6600 | 3670 | ||
| 48 | 15120 | 6800 | 3770 | ||
| 96 | 17340 | 7800 | 4330 | ||
| bentang | Inti | RTS (N) | MAT (N) | EDS (N) | |
| 300 | 12 | 7200 | 3200 | 1700 | |
| 24 | 7200 | 3200 | 1700 | ||
| 36 | 7200 | 3200 | 1700 | ||
| 48 | 8200 | 3600 | 2000 | ||
| 96 | 9400 | 4200 | 2200 | ||
| bentang | Inti | RTS (N) | MAT (N) | EDS (N) | |
| 400 | 12 | 16450 | 7400 | 4100 | |
| 24 | 16450 | 7400 | 4100 | ||
| 36 | 16450 | 7400 | 4100 | ||
| 48 | 17340 | 7800 | 4330 | ||
| 96 | 19340 | 8700 | 4830 | ||
| bentang | Inti | RTS (N) | MAT (N) | EDS (N) | |
| 500 | 12 | 24500 | 11000 | 6120 | |
| 24 | 24500 | 11000 | 6120 | ||
| 36 | 25800 | 11000 | 6120 | ||
| 48 | 8200 | 11600 | 6440 | ||
| 96 | 28900 | 13000 | 7200 | ||
| bentang | Inti | RTS (N) | MAT (N) | EDS (N) | |
| 600 | 12 | 28100 | 12600 | 7000 | |
| 24 | 28100 | 12600 | 7000 | ||
| 36 | 28100 | 12600 | 7000 | ||
| 48 | 29400 | 13200 | 7300 | ||
| 96 | 32500 | 14600 | 8100 | ||
| bentang | 芯数Inti | RTS (N) | MAT (N) | EDS (N) | |
| 800 | 12 | 32500 | 14600 | 8100 | |
| 24 | 32500 | 14600 | 8100 | ||
| 36 | 32500 | 14600 | 8100 | ||
| 48 | 34300 | 15400 | 8550 | ||
| 96 | 38300 | 17200 | 9550 | ||
| bentang | 芯数Inti | RTS (N) | MAT (N) | EDS (N) | |
| 800 | 12 | 44500 | 20000 | 11200 | |
| 24 | 44500 | 20000 | 11200 | ||
| 36 | 44500 | 20000 | 11200 | ||
| 48 | 46100 | 20700 | 1150 | ||
| 96 | 53400 | 24000 | 13300 | ||
| Ngaremuk | Jangka pondok | 3000N / 100 mm | |||
(Kinerja Lingkungan)
| (Barang) | (Standar) | (Parameter) |
| Suhu operasi | IEC 60794-1-2 F1 | -20 ℃～+60℃ |
(Drum)
| (Jenis kabel) | (Drum) | ||||
| Jangkungna (mm) | Lebar (mm) | Diaméter jero (mm) | Panjangna (km) | Jenis kendang | |
| ADSS-12、24、36、48-200m | 1050 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-96-200m | 1100 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-12、24、36、48-300m | 1050 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-96-300m | 1150 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-12、24、36-400m | 1050 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-48-400m | 1100 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-96-400m | 1150 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-12、24、36、-500m | 1050 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-48-500m | 1100 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-96-500m | 1150 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-12、24、36、-600m | 1050 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-48-600m | 1100 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-96-600m | 1200 | 760 | 500 | 2 | Kendang kayu beusi |
| ADSS-12、24、36、48-800m | 1100 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-96-800m | 1250 | 760 | 500 | 2 | Kendang kayu beusi |
| ADSS-12、24、36/48-1000m | 1150 | 760 | 500 | 2 | Kayu lapisdmiras |
| ADSS-96-1000m | 1400 | 760 | 650 | 2 | Kendang kayu beusi |
