China GYXTW Outdoor Duct Aerial Uni-tube Light-armored Cable Manufacturer and Supplier

Application

Aerial/Duct/Outdoor

Characteristic

1，Excellent mechanical and temperatureperformanceguaranteed by the accurate excess fiber lengt.
2，Critical protection to fibers, based on the excellent hydrolysis resistance.
3，Excellent crush resistance and flexibility.
4，PSP enhances the cable crush-resistance, impact-resistance and moisture-proof.
5，Two parallelsteel wires ensure tensile strength.
6，Excellent ultraviolet prevention with PE sheath，small diameter, light weight and installation friendliness.

Temperature Rage

Operating :-40℃ to +70℃
Storage :-40℃ to +70℃

Standards

Comply with standard YD/T 769-2010

Technical Parameters

Cable Type （Increased by 2fibers)	Fiber Count	Cable Diameter (mm)	Cable Weight (kg/km)	Tensile StrengthLong/Short Term( N)	Crush ResistanceLong/Short Term (N/100mm)	Bending Radius Static/Dynamic(mm)
GYXTW 2 ~12	2 ~ 12	8.2	78	600/1500	300/1000	10D/20D

Noted:

1，Only a part of Aerial/Duct/Direct Buried/UnderGround/Armoured cables are listed in the table. Cables with other specifications can be inquired.
2，Cables can be supplied with a range of single mode or multimode fibers.
3，Specially designed Cable structure is available on request.

Packing Material:

Non-returnable wooden drum.
Both ends of the fiber optic cables are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3，000m±2%;

Cable printing:

The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

1. Cable type and number of optical fiber
2. Manufacturer name
3. Month and Year of Manufacture
4. Cable length

Drum marking:

Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

1. Manufacture name and logo
2. Cable length
3. Fiber cable types and number of fibers,etc
4. Rollway
5. Gross and net weight

Remark: The cables are packed in carton, coiled on Bakelite & steel drum. During transportation, right tools should be used to avoid damaging the package and to handle with ease. Cables should be protected from moisture,kept away from high temperature and fire sparks,protected from over bending and crushing,protected from mechanical stress and damage.

Optical Cable Factory

In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.

GL Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach 1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.