Moralo oa Sebopeho
Kopo
Aerial/Duct/Kantle
Sebopeho
1. Ts'ebetso e ntle haholo ea mochini le mocheso o tiisitsoeng ke fiber e feteletseng e alimang.
2. Tšireletso ea bohlokoa ho li-fibers, e thehiloeng ho matla a ho hanyetsa ha hydrolysis.
3. Excellent silakanya ho hanyetsa le ho tenyetseha.
4. PSP e ntlafatsa ho hanyetsa ha cable, ho hanyetsa tšusumetso le bopaki ba mongobo.
5. Lithapo tse peli tse tšoanang tsa tšepe li tiisa hore ho na le matla a tsitsitseng.6. Tšireletso e ntle ea ultraviolet e nang le PE sheath, bophara bo nyane, boima bo bobebe le botsoalle ba ho kenya.
Khalefo ea Mocheso
E sebetsa: -40 ℃ ho ea +70 ℃ Storage : -40 ℃ ho +70 ℃
Litekanyetso
Latela maemo a YD/T 769-2010
Litšobotsi tsa Theknoloji
1)Theknoloji e ikhethang ea extruding e fana ka likhoele tse ka har'a tube ka ho feto-fetoha ha maemo le mamello ea ho khumama
2)Mokhoa o ikhethileng oa ho laola bolelele bo feteletseng ba fiber o fana ka mohala o nang le thepa e ntle ea mochini le tikoloho Ho tlatsoa ha lintho tse ngata tse thibelang metsi ho fana ka ts'ebetso e 'meli ea ho thibela metsi.
B1.3(G652D) fiber ea mofuta o le mong
| Litlhaloso tsa Optics |
| Ho fokotseha(dB/km) | @1310nm | ≤0.36db/km |
| @1383nm (kamora botsofali ba haedrojene) | ≤0.32db/km |
| @1550nm | ≤0.22db/km |
| @1625nm | ≤0.24db/km |
| Phasano | @1285nm~1340nm | -3.0~3.0ps/(nm*km) |
| @1550nm | ≤18ps/(nm*km) |
| @1625nm | ≤22ps/(nm*km) |
| Zero-Dispersion wavelength | 1300 ~ 1324nm |
| Letsoapo la Zero-Dispersion | ≤0.092ps/(nm2*km) |
| Boemo ba sebaka sa bophara @ 1310nm | 9.2±0.4μm |
| Mokhoa oa sebaka sa bophara @ 1550nm | 10.4±0.8μm |
| PMD | Max.boleng ba fiber ho reel | 0.2ps/km 1/2 |
| Max.Boleng bo entsoeng bakeng sa sehokelo | 0.08ps/km 1/2 |
| Cable cutoff wavelength, λ cc | ≤1260nm |
| Lenane le sebetsang la sehlopha(Neff)@1310nm | 1.4675 |
| Lenane le sebetsang la sehlopha(Neff)@1550nm | 1.4680 |
| Macro-bend loss(Φ60mm,100 turns)@1550nm | ≤0.05db |
| Sebopeho sa ho hasanya ka morao(@1310nm&1550nm) |
| Ntlha ea ho khaotsa | ≤0.05db |
| Ho tšoana ha attenuation | ≤0.05db/km |
| Attenuation coefficient e fapaneng bakeng sa tekanyo ea mahlakore a mabeli | ≤0.05db/km |
| Litšobotsi tsa Geometri |
| Bophara ba ho roala | 125±1μm |
| Ho koahela ho se pota-potile | ≤1% |
| Phoso ea ho tsepamisa maikutlo hoa mantlha | ≤0.4μm |
| Bophara ba fiber e nang le koae (e se nang mebala) | 245±5μm |
| Phoso ea ho koaheloa/ho koaela concentricity | ≤12.0μm |
| Mokokotlo | ≥4m |
| Sebopeho sa mochini |
| Tlhahlobo ea bopaki | 0.69GPa |
| Matla a ho roala (boleng bo tloaelehileng) | 1.4N |
| Paramethara ea ho ba le khatello e matla ea kutu (boleng bo tloaelehileng) | ≥20 |
| Litšobotsi tsa tikoloho(@1310nm&1550nm) | |
| Phokotso e bakoang ke mocheso(-60~+85℃) | ≤0.5dB/km |
| Mocheso o omileng o bakile ho thella (85 ± 2 ℃, matsatsi a 30) | ≤0.5dB/km |
| Ho qoelisoa ka metsing ho ile ha etsa hore ho fokotsehe (23±2℃,30days) | ≤0.5dB/km |
| Mocheso o mongobo o bakileng attenuation (85±2 ℃,RH85%,30days) | ≤0.5dB/km |
GYXTW Fiber Cable Technical Parameter
| Nomoro ea Fiber | 24 | 48 |
| Fiber No. ka tube | 4 | 4 |
| Palo ea tube ea Loose | 6 | 12 |
| Bophara ba tube bo hlephileng | 1.8mm |
| Thepa e hlephileng | PBT polybutylece terephthalate |
| Gel e tlatsitsoe ka tube e hlephileng | Ee |
| Molaetsa oa mohala | 2X1.0mm |
| thapo OD | 10 limilimithara |
| Sebaka sa mocheso oa ts'ebetso | -40 ° C ho ea ho +70 ° C |
| Mocheso oa ho kenya mocheso | -20 ℃ ho + 60 ℃ |
| Mocheso oa lipalangoang le oa polokelo | -40 ℃ ho + 70 ℃ |
| Matla a matla (N) | Nako e khuts'oane 1500N Nako e telele 1000N |
| Monyetla o fokolang oa ho kobeha radius | 20 x OD |
| Radius e kobehang ea ts'ebetso e nyane | 10 x OD |
Ela hloko:
1, Ke karolo feela ea likhoele tsa Aerial/Duct/Direct Buried/ Underground/Armoured tse thathamisitsoeng tafoleng.Lithapo tse nang le lintlha tse ling li ka botsoa.
2, Lithapo li ka fanoa ka mefuta e mengata ea mofuta o le mong kapa likhoele tsa multimode.
3, Sebopeho sa Cable se entsoeng ka ho khetheha se fumaneha ka kopo.
Bula Whats App
