banner

2-96 Core Single Layer Overhead ADSS Cable For Mini Span(80/100/120m/150m)

GL Mini-Span All-Dielectric Self Supporting (ADSS) fiber optic cable is designed for outside plant aerial and duct applications in local and campus network loop architectures. Mini-Span includes fiber counts up to 144 optical fibers and any type of combination of single-mode and laser-optimized multimode fibers with the cable.

Pole-to-Pole span lengths range from 50 m to over 150 m. Custom ADSS design options allow span lengths of over one mile (5,280 feet)

Fiber Type: G652D; G655C; 657A1; 50/125; 62.5/125; OM3; OM4 As Options

Span: 50 feet to over 1000 feet.

Application: Self-support Aerial installation

Description

Specification

Package & Tansportation

Main Feature:
1.Suitable for use on distribution and high voltage transmission lines with mini spans or self-supporting installation for telecommunication ;
2.Track -Resistant outer jacket available for the high voltage;
3.Line where space potentials up to 35kv;
4.Gel-Filled buffer tubes are S-Z stranded;
5.Instead of Aramid yarn or glass yarn, there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
6.The fiber counts from 4-288 fibers.

Standards:

GL Technology's ADSS Fiber Optical Cable complies with IEEE 1222, IEC 60794-4-20, ANSI/ICEA S-87-640, TELCORDIA GR-20, IEC 60793-1-22, IEC 60794-1-2, IEC 60794 standards

Write your message here and send it to us

Technical Parameter:

Parameters Specification
Optical Characteristics
Fiber Type G652.D
Mode Field Diameter (um) 1310nm 9.1 ± 0.5
1550nm 10.3 ± 0.7
Attenuation Coefficient (dB/km) 1310nm ≤ 0.35
1550nm ≤ 0.21
Attenuation Non-uniformity (dB) ≤ 0.05
Zero Dispersion Wavelength ( λ0) (nm) 1300 ~ 1324
Max Zero Dispersion Slope (S0max) (ps/(nm2·km)) ≤ 0.093
Polarization Mode Dispersion Coefficient (PMDQ) (ps/km1/2) ≤ 0.2
Cut-off Wavelength (λcc) (nm) ≤ 1260
Dispersion Coefficient (ps/ (nm·km)) 1288~1339nm ≤ 3.5
1550nm ≤ 18
Effective Group Index of Refraction (Neff) 1310nm 1.466
1550nm 1.467
Geometric characteristic
Cladding Diameter (um) 125.0 ± 1.0
Cladding Non-circularity (%) ≤ 1.0
Coating Diameter (um) 245.0 ± 10.0
Coating-cladding Concentricity Error (um) ≤ 12.0
Coating Non-circularity (%) ≤ 6.0
Core-cladding Concentricity Error (um) ≤ 0.8
Mechanical characteristic
Curling (m) ≥ 4
Proof Stress (GPa) ≥ 0.69
Coating Strip Force (N)  Average Value 1.0    5.0
Peak Value 1.3 ~ 8.9
Macro Bending Loss (dB) Ф60mm, 100 Circles, @ 1550nm ≤ 0.05
Ф32mm, 1 Circle, @ 1550nm ≤ 0.05

 Specifications:

Parameters Specification
Fiber Count 2 6 12 24 60 144
Loose Tube Material PBT
Fibers per Tube 2 4 4 4 12 12
Numbers 1 2 3 6 5 12
Filler Rod Numbers 5 4 3 0 1 0
Central Strength Member Material FRP FRP coated PE
Water Blocking Material Water blocking yarn
Additional Strength Member Aramid yarns
Inner Jacket Material Black PE (Polythene)
Thickness Nominal: 0.8 mm
Outer Jacket Material Black PE (Polythene) or AT
Thickness Nominal: 1.7 mm
Cable Diameter (mm) 11.4 11.4 11.4 11.4 12.3 17.8
Cable Weight (kg/km) 94 ~ 101 94 ~ 101 94 ~ 101 94 ~ 101 119 ~ 127 241 ~ 252
Rated Tension Stress (RTS) (KN) 5.25 5.25 5.25 5.25 7.25 14.5
Maximum Working Tension (40%RTS) (KN) 2.1 2.1 2.1 2.1 2.9 5.8
Everyday Stress (15-25%RTS) (KN) 0.78 ~ 1.31 0.78 ~ 1.31 0.78 ~ 1.31 0.78 ~ 1.31 1.08 ~ 1.81 2.17 ~ 3.62
Allowable Maximum Span (m) 100
Crush Resistance (N/100mm) Short time 2200
Suiting Meteorological Condition Max wind speed: 25m/s
Max icing: 0mm
Bending Radius (mm) Installation 20D
Operation 10D
Attenuation (After Cable) (dB/km) SM Fiber @1310nm ≤ 0.36
SM Fiber @1550nm ≤ 0.22
Temperature Range Operation (℃) -40 ~ +70
Installation (℃) -10 ~ +50
Storage & Shipping (℃) -40 ~ +60

Packing and Marking

  • Each single length of cable shall be reeled on Fumigated Wooden Drum
  • Covered by plastic buffer sheet
  • Sealed by strong wooden battens
  • At least 1 m of inside end of cable will be reserved for testing.
  • Drum length: Standard drum length is 3,000m±2%; as required
  • 5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
  • Manufacturing year and month Roll—direction arrow;
  • Drum length; Gross/net weight;

Packaging and Shipping

Packaging & Shipping

Send your message to us:

Write your message here and send it to us