Custom Image

Single Jacket All-Dielectric Self-Supporting (ADSS) Cable

ADSS cable is loose tube stranded. The 250um bare fibers are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes and fillers are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. It is covered with thin PE (polyethylene) inner sheath. After stranded layer of armaid yarns are applied over the inner sheath as strength member, the cable is completed with PE or AT (anti-tracking) outer sheath.

We can customize the number of cores of ADSS cables according to customer needs. The number of cores of optical fiber ADSS cable is 2, 6, 12, 24, 48 cores, etc.

 

Application: Self-support aerial installation.

Fiber Type: G652D; G655C.

Fiber counts: from 4 to 288 fibers;

Span: 50m ~ 300m.

Standard: IEC 60794-4、 IEC 60793、TIA/EIA 598 A

Description

Specification

Package & Tansportation

Structure Design:

https://www.gl-fiber.com/all-dieletric-frp-strength-12-24-48-cores-singlemode-outdoor-adss-fiber-cable.htmlhttps://www.gl-fiber.com/all-dieletric-frp-strength-12-24-48-cores-singlemode-outdoor-adss-fiber-cable.htmlhttps://www.gl-fiber.com/all-dieletric-frp-strength-12-24-48-cores-singlemode-outdoor-adss-fiber-cable.html

Main Feature:
1. Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication;
2. Track -Resistant outer jacket available for the high voltage (≥35KV); HDPE outer jacket available for the high voltage (≤35KV);
3. Excellent AT performance. The maximum inductive at the operating point of AT jacket can reach 25kV.
4. Gel-Filled buffer tubes are S-Z stranded;
5. Can be installed without shutting off the power.
6. Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops.
7. Good performance of tensile strength and temperature.
8. The design life span is over 30 years.

Standards:
GL Technology's ADSS Fiber Optical Cable complies with IEC 60794-4, IEC 60793, TIA/EIA 598 A standards.

Advantages of GL ADSS Cable:
1.Good aramid yarn have excellent tensile performance;
2.Fast delivery, 200km ADSS cable regular production time about 10 days;
3.Can using glass yarn instead of aramid to anti rodent.

Technical Parameter:

Fiber count Structure Fiber per tube Thickness of outer jacket
(mm)
Outer jacket material Cable diameter(mm) MAT(KN) Crush Short term Temperature Min. bending radius Wind speed Ice cover
Operation  Temperature Storage  Temperature Static Dynamic
4 1+6 4 1.5-1.7 HDPE 10.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃ 10 times cable diameter 20 times cable diameter 25m/s 0
6 1+6 6 1.5-1.7 HDPE 10.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
8 1+6 8 1.5-1.7 HDPE 10.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
12 1+6 6/12 1.5-1.7 HDPE 10.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
24 1+6 6/12 1.5-1.7 HDPE 10.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
36 1+6 6/12 1.5-1.7 HDPE 10.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
48 1+6 8/12 1.5-1.7 HDPE 10.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
72 1+6 12 1.5-1.7 HDPE 10.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
96 1+8 12 1.5-1.7 HDPE 10.8±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
144 1+12 12 1.5-1.7 HDPE 12.2±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃
288 1+12 24 1.5-1.7 HDPE 17.0±0.5 1.8-2.1 1000N/100mm -20℃~+70℃ -40℃~+70℃

REMARKS:
Detail requirements need to be sent to us for adss fiber cable design and price calculation. Below requirements are a must:
A, Power transmission line voltage level
B, fiber count
C, Span or tensile strength
D, weather conditions

How to Ensure the Quality and Performance of Your Fiber Optic Cable?

We control the products quality from the raw material to the finish produts All the raw material should be tested to match the Rohs standard when they arrived at our manufacture.We control the quality during the producing process by advanced technology and equipments. We test the finished products according to the test standard. Approved by various professional optical and communication product institution , GL also conduct various in-house testing in its own Laboratory and Test Center. We also conduct test with special arrangement with the Chinese Government Ministry of Quality Supervision & Inspection Center of Optical Communication Products(QSICO).

Quality Control - Test Equipment and Standard:

https://www.gl-fiber.com/products/

Feedback: In order to meet the world’s highest quality standards, we continuously monitor feedback from our customers. For comments and suggestions, please, contact us, Email: inquiry@gl-fibercable.com.

Write your message here and send it to us

Specification of Optical Fiber:

 (Item) Unit Specification Specification Specification Specification
G. 657A1 G. 657A2 G. 652D G. 655
Mode field diameter 1310nm mm 8.6-9.5 ± 0.4 8.6-9.5 ± 0.4 9.2 ± 0.4 9.6± 0.4μm
Cladding diameter mm 125.0 ± 0.7 125.0 ± 0.7 125.0 ± 1 125 ±0.7μm
Cladding non-circularity % £1.0 £1.0 £1.0 £1.0
Core/cladding concentricity error mm £0.5 £0.5 £0.5 £0.5
Coating diameter mm 245 ± 5 245 ± 5 242 ± 7 242 ± 7
Coating/cladding concentricity error mm £12 £12 £12 £12
Cable cut-off wavelength nm £ 1260 £ 1260 £ 1260 £ 1260
Attenuation Coefficient 1310nm dB/km £0.36 £0.36 £0.35 £0.35
1550nm dB/km £0.22 £0.22 £0.22 £0.22
1 turn on 10±0.5mm Dia. Mandrel 1550nm dB/km £0.75 £0.5 - -
1 turn on 10±0.5mm Dia. Mandrel 1625nm dB/km £1.5 £1.0 - -
Proof stress level kpsi ≥100 ≥100 ≥100 ≥100
 (Item) Unit Specification Specification Specification Specification
OM1 OM2 OM3 OM4
Mode field diameter 1310nm mm 62.5±2.5 50±2.5 50±2.5 50±2.5
1550nm mm 125.0 ± 1.0 125.0 ± 1.0 125.0 ± 1.0 125.0 ± 1.0
Cladding diameter mm £1.0 £1.0 £1.0 £1.0
Cladding non-circularity % £1.5 £1.5 £1.5 £1.5
Core/cladding concentricity error mm 245 ± 10 245 ± 10 245 ± 10 245 ± 10
Coating diameter mm £12 £12 £12 £12
Coating/cladding concentricity error mm ≥ 160 ≥ 500 ≥ 1500 ≥ 3500
Cable cut-off wavelength nm ≥ 500 ≥ 500 ≥ 500 ≥ 500
Attenuation Coefficient 1310nm dB/km £3.5 £3.5 £3.5 £3.5
1550nm dB/km £1.5 £1.5 £1.5 £1.5
Proof stress level kpsi ≥100 ≥100 ≥100 ≥100

https://www.gl-fiber.com/single-jacket-all-dielectric-self-supporting-adss-fiber-optic-cable.html

Packing:
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3,000m±2%;

Drum Marking:
• Manufacturer name;
• Manufacturing year and month
• Roll–‐direction arrow;
• Drum length;
• Gross/net weight;

1 Length&Packing 2KM 3KM 4KM 5KM
2 Packing Fumigate wooden drum Fumigate wooden drum Fumigate wooden drum Fumigate wooden drum
3 Size 900*750*900MM 1000*680*1000MM 1090*750*1090MM 1290*720*1290
4 Net weight 156KG 240KG 300KG 400KG
5 Gross weight 220KG 280KG 368KG 480KG

Remarks:The reference cable diameter 10.0MM and the span 100M. For specific specifications, please ask the sales department.

https://www.gl-fiber.com/products-adss-cable/

Send your message to us:

Write your message here and send it to us

Discount Event: Save 5%