banner

GYXY Unitube Non-armored FO Cable

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. Over the tube, water-blocking material is applied to keep the cable watertight. Two parallel steel wires are placed at the two sides. The cable is completed with a polyethylene (PE) sheath.

 

Model: Central Tube All Dielectric Optic Cable

Brand: GL Fiber

 

 

 

 

Description
Specification
Package & Shipping
Factory Show
Leave Your Feedback

Cable Section:

gyxy-2

 

Application:

Duct installation or aerial installation

 

Main Features:

· Good mechanical and temperature performance
· High strength loose tube that is hydrolysis resistant
· Special tube filling compound ensure a critical protection of fiber
· Two parallel steel wires ensure tensile strength
· PE sheath protects cable from ultraviolet radiation
· Small diameter, light weight and friendly installation
· Long delivery length

 

Standard:

GYXY cable complies with Standard YD/T 769-2003.

 

Specifications:

             G.652 G.655 50/125μm 62.5/125μm    
Attenuation(+20℃) @850nm     ≤3.0 dB/km ≤3.0 dB/km
@1300nm     ≤1.0 dB/km ≤1.0 dB/km
@1310nm ≤0.36 dB/km ≤0.40 dB/km    
@1550nm ≤0.22 dB/km ≤0.23dB/km    
Bandwidth (Class A) @850nm     ≥500 MHz·km ≥200 MHz·km
@1300nm     ≥1000 MHz·km ≥600 MHz·km
Numerical Aperture     0.200±0.015NA 0.275±0.015NA
Cable Cut-off Wavelength  ≤1260nm ≤1480nm    

 

Technical Parameter:

Cable Type Fiber Count Cable Diametermm Cable Weight kg/km Tensile Strength Long/Short Term N Crush Resistance Long/Short TermN/100mm Bending Radius Static/Dynamic (mm)
GYXY 2~12 9.5 90 600/1500 300/1000 10D/20D
GYXY 2~12 10.2 100 1000/3000 1000/3000 10D/20D

Storage/Operating Temperature : -40℃ to + 70℃

Write your message here and send it to us

Cable Section:

gyxy-2

 

Application:

Duct installation or aerial installation

 

Main Features:

· Good mechanical and temperature performance
· High strength loose tube that is hydrolysis resistant
· Special tube filling compound ensure a critical protection of fiber
· Two parallel steel wires ensure tensile strength
· PE sheath protects cable from ultraviolet radiation
· Small diameter, light weight and friendly installation
· Long delivery length

 

Standard:

GYXY cable complies with Standard YD/T 769-2003.

 

Specifications:

             G.652 G.655 50/125μm 62.5/125μm    
Attenuation(+20℃) @850nm     ≤3.0 dB/km ≤3.0 dB/km
@1300nm     ≤1.0 dB/km ≤1.0 dB/km
@1310nm ≤0.36 dB/km ≤0.40 dB/km    
@1550nm ≤0.22 dB/km ≤0.23dB/km    
Bandwidth (Class A) @850nm     ≥500 MHz·km ≥200 MHz·km
@1300nm     ≥1000 MHz·km ≥600 MHz·km
Numerical Aperture     0.200±0.015NA 0.275±0.015NA
Cable Cut-off Wavelength  ≤1260nm ≤1480nm    

 

Technical Parameter:

Cable Type Fiber Count Cable Diametermm Cable Weight kg/km Tensile Strength Long/Short Term N Crush Resistance Long/Short TermN/100mm Bending Radius Static/Dynamic (mm)
GYXY 2~12 9.5 90 600/1500 300/1000 10D/20D
GYXY 2~12 10.2 100 1000/3000 1000/3000 10D/20D

Storage/Operating Temperature : -40℃ to + 70℃

https://www.gl-fiber.com/products-outdoor-fiber-optic-cable/

Packing Material:

Non-returnable wooden drum.
Both ends of the fiber optic cables are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3,000m±2%;

Cable printing: 

The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

1. Cable type and number of optical fiber
2. Manufacturer name
3. Month and Year of Manufacture
4. Cable length

Drum marking:  

Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

1. Manufacture name and logo
2. Cable length
3. Fiber cable types and number of fibers,etc
4. Rollway
5. Gross and net weight

Remark:  The cables are packed in carton, coiled on Bakelite & steel drum. During transportation, right tools should be used to avoid damaging the package and to handle with ease. Cables should be protected from moisture,kept away from high temperature and fire sparks,protected from over bending and crushing,protected from mechanical stress and damage.

outdoor fiber cable

outdoor cable

Optical Cable Factory

In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.

GL  Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach  1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

Send your message to us:

Write your message here and send it to us