banner

GYXTC8Y Outdoor Aramid Yarn Areial Fiber Optic Cable

Mini Figure 8 drop Fiber Optic Cable which is an excellent stripping performance of tight buffer fiber Cable, its diameter and bending radius are small. It’s full filling with aramid yarn.   It can installation freely in narrow room.This cable consist of the loose tube with single mode or multimode fibers and steel wire as the messenger wire, which are formed like “Figure 8”. After aramid yarn is applied over the inner sheath, the cable is completed with a PE outer sheath.

Application: Self supporting Aerial for FTTH Solution

Description
Specification
Package & Shipping
Factory Show
Leave Your Feedback

Structure Design:

Fiber Type:G652D; G655C; 657A1; 50/125; 62.5/125; OM3; OM4 As Options

Application: Self supporting Aerial for FTTH Solution

Main Feature:
1,Accurate optical fiber excess length ensures good mechanical and temperature performance.,
2,High strength loose tube that is hydrolysis resistant and special tube filling compound and flexibility.
3,Figure 8 self supporting type structure possesses high tensile strength and is convenient for aerial installation and its installation cost is cheap.
4,The service life of the products willbe more 30 years.
5,Light, flexible, easy for the laying and it is used for FTTH solution.

Temperature Range: Operating :-40℃ to +70℃ Storage :-40℃ to +70℃

Standards: Comply with stand YD/T 1155-2001 as well as IEC60794-1.

Mechanical & Environmental Characteristics:

Item Characteristics
Operation temperature -40℃~ + 70℃
Storage temperature -40℃~ + 60℃
Sheath Material P:PE
Dimensional Characterstics    
Fiber count Outer sheath Cable dia.(mm) cable height(mm) Messenger wire (mm) cable net weight (kg/km) strength short term(n) crush pressure short term (n/100mm) crush pressure short term(n/100mm)
2~12 PE 5 10.1 1.6 47 1000 1000 1000
Model Number GYXTC8Y
Type Coaxial
shape figure 8
Certification UL ,ROHS,SGS
Fiber SM/MM/OM3/OM4
Fiber Core 2-24 core
Jacket Material PE /LSZH/PU
Laying method Pipeline/Overhead/Direct bury/Duct
keywords outdoor fiber optic cable
Color Black or customized
Fiber brand Corning, LS, etc
Fire Resistant Yes
Armored or not Corrugated steel tape armored

How to Ensure the Quality and Performance of Your Fiber Optic Cable?

We control the products quality from the raw material to the finish produts All the raw material should be tested to match the Rohs standard when they arrived at our manufacture.We control the quality during the producing process by advanced technology and equipments. We test the finished products according to the test standard. Approved by various professional optical and communication product institution , GL also conduct various in-house testing in its own Laboratory and Test Center. We also conduct test with special arrangement with the Chinese Government Ministry of Quality Supervision & Inspection Center of Optical Communication Products(QSICO).

Quality Control - Test Equipment and Standard:

https://www.gl-fiber.com/products/Feedback: In order to meet the world’s highest quality standards, we continuously monitor feedback from our customers. For comments and suggestions, please, contact us, Email: [email protected].

Write your message here and send it to us

Structure Design

Fiber Type:G652D; G655C; 657A1; 50/125; 62.5/125; OM3; OM4 As Options

Application: Self supporting Aerial for FTTH Solution

Main Feature

1,Accurate optical fiber excess length ensures good mechanical and temperature performance.,

2,High strength loose tube that is hydrolysis resistant and special tube filling compound and flexibility.

3,Figure 8 self supporting type structure possesses high tensile strength and is convenient for aerial installation and its installation cost is cheap.

4,The service life of the products willbe more 30 years.

5,Light, flexible, easy for the laying and it is used for FTTH solution.

Temperature Range

Operating :-40℃ to +70℃ Storage :-40℃ to +70℃

Standards

Comply with stand YD/T 1155-2001 as well as IEC60794-1.

Mechanical & Environmental Characteristics

Item Characteristics
Operation temperature -40℃~ + 70℃
Storage temperature -40℃~ + 60℃
Sheath Material P:PE
Dimensional Characterstics    
Fiber count Outer sheath Cable dia.(mm) cable height(mm) Messenger wire (mm) cable net weight (kg/km) strength short term(n) crush pressure short term (n/100mm) crush pressure short term(n/100mm)
2~12 PE 5 10.1 1.6 47 1000 1000 1000
Model Number GYXTC8Y
Type Coaxial
shape figure 8
Certification UL ,ROHS,SGS
Fiber SM/MM/OM3/OM4
Fiber Core 2-24 core
Jacket Material PE /LSZH/PU
Laying method Pipeline/Overhead/Direct bury/Duct
keywords outdoor fiber optic cable
Color Black or customized
Fiber brand Corning, LS, etc
Fire Resistant Yes
Armored or not Corrugated steel tape armored

https://www.gl-fiber.com/products-outdoor-fiber-optic-cable/

Packing Material:

Non-returnable wooden drum.
Both ends of the fiber optic cables are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3,000m±2%;

Cable printing: 

The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

1. Cable type and number of optical fiber
2. Manufacturer name
3. Month and Year of Manufacture
4. Cable length

Drum marking:  

Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

1. Manufacture name and logo
2. Cable length
3. Fiber cable types and number of fibers,etc
4. Rollway
5. Gross and net weight

Port:
Shanghai/Guangzhou/Shenzhen

Lead Time:
Quantity(KM) 1-300 ≥300
Est.Time(Days) 15 To be begotiated!

 

 

Note:The Packing standard and details as above is estimated and final size & weight shall be confirmed before shipment.  

Remark:  The cables are packed in carton, coiled on Bakelite & steel drum. During transportation, right tools should be used to avoid damaging the package and to handle with ease. Cables should be protected from moisture,kept away from high temperature and fire sparks,protected from over bending and crushing,protected from mechanical stress and damage.

outdoor fiber cable

outdoor cable

 

<s

Optical Cable Factory

In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.

GL  Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach  1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

Send your message to us:

Write your message here and send it to us