Communication Optical Cable Cross Connecting Cabinet is the interface equipment suitable for the exchanging between trunk optical cable and optical distribution cable. It is integrating heat sealing, roll storage and distribution of the fiber. It can be mounted both floor and aerial modes.
Features
1，It is designed and manufactured according to the latest revised edition of YD/T 998 trade criterion.
2，Cabinet body adopts two kinds of materials including Sheet Molding Compound (SMC) and stainless steel.
3，Heat insulation device can be installed inside stainless steel box body according to users’ requirements to withstand the effect of climate and environment.
4，Apply optical fiber splice tray of double-sided structure to make full use of the two sides of the board, and integrate heat sealing and wiring into one unity. Each board can be fixed with twelve FC/SC/ST type adapters.
5，Install adaptor on the face side of optical fiber splice tray in a bayonet way at an oblique angle of 30 degrees to ensure curve radius of optical fiber and prevent from being damaged by laser light.
6，It is applied to common optical cables and ribbon-shaped optical cables, with large wiring space. All optical cables and optical fibers can be effectively protected inside the distribution frame.
7，Cabinet door lock has good protection function against breaking and is flexible and reliable to unlock and lock up. The opening angle of box door is more than 120 degrees. The box is well sealed.
8，Users can choose suitable base and platform for fixing electric pole.
Application:
>Fiber to The Point (FTTX)
>Fiber to The Home (FTTH)
>Fiber to The Building(FTTB)
>Passive Optical Networks (PON)
>Cable Television (CATV)
>Network Equipment Room
Thunder-proof technical Datasheet:
1，The grounding device is isolated with the cabinet, isolation resistance is no less than 2*104MΩ/500V(DC) (IR ≥ 2*104MΩ/500V).
2，The withstand voltage between grounding device and cabinet is no less than 3000 V(DC)/min (U ≥ 3000 V(DC)/min), no puncture, no flashover.
3，Sealability is meets the IP65 level requirements in GB/T4208.
4，Life Span ≥ 20 years.
Only a part of Joint Box/Splice Closure/Joint Closure are listed here. We can depend on customer’s requirement to producing the different model Joint Box/Splice Closure/Joint Closure.
We supply OEM&ODM Service.
Contact Us Now !
E-Mail: [email protected]
WhatsApp:+86 18073118925 Skype: opticfiber.tim
In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.
GL Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach 1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.
Open Whats App
