banner

OPGW Typical Designs of Stranded Stainless Steel Tube

OPGW Mainly used for power communication with accessories,relay protection,automatic transmission,installation together with high-voltage lines.

The Stranded Optical Ground Wire (OPGW) is stranded by double or three layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires, Its design is fully adapted to the most common electric line needs…

Product Name: Optical Fiber Composite Overhead Ground Wire

Brand Place of Origin: GL Hunan,China (Mainland)

Application: Aerial , Overhead , Outdoor

Typical Design: Stranded Stainless Steel Tube Type

 

Description
Specification
Package & Shipping
Factory Show
Leave Your Feedback

Characteristic:

1. High quality IEC607948 IEEE1138 standards for designing, testing and producing with grade A materials available to ensure long-term reliability .
2. Engineering support supervising and providing its own line of accessories hardware .
3. Larger tensile strength and fault current capacity to reach a better balance of electrical and mechanical performance.

 

Advantages of GL OPGW fiber optic cable:

1. Three typical designs: central tube,stranded wire,PBT loose tube;
2. 200km OPGW cable regular production time about 20 days;
3. Type test including salt corrosion,suitable in harsh corrosive environment,especially near the sea.

OPGW has two fiber type : one is single mode G652D , and the other is G655 , sometimes they mixed together , such like OPGW-36B1+12B4-93 [78.8;53.9] . Fiber optic cable OPGW, usually 12~48 fibers,GL can max produced 96 fibers OPGW fiber optic cable, jelly filled and fiber contained central PBT loose/aluminum cladding steel/aluminum tube, outer with AA/ACS wires armored, detailed specification on your request.

ITU-TG.652 Characteristics of a single mode optical fiber.
ITU-TG.655 Characteristics of a non-zero dispersion -shifted single mode fibers optical.
EIA/TIA598 B Col code of fiber optic cables.
IEC 60794-4-10 Aerial optical cables along electrical power lines-family specification for OPGW.
IEC 60794-1-2 Optical fiber cables -part test procedures.
IEEE1138-2009 IEEE Standard for testing and performance for optical ground wire for use on electric utility power lines.
IEC 61232 Aluminum -Clad steel wire for electrical purposes.
IEC60104 Aluminum magnesium silicon alloy wire for overhead line conductors.
IEC 6108 Round wire concentric lay overhead electrical stranded conductors.
Write your message here and send it to us
Technical Parameter

Typical design for Double Layer:

Specification Fiber Count Diameter(mm) Weight (kg/km) RTS(KN) Short Circuit (KA2s)
OPGW-89[55.4;62.9] 24 12.6 381 55.4 62.9
OPGW-110[90.0;86.9] 24 14 600 90 86.9
OPGW-104[64.6;85.6] 28 13.6 441 64.6 85.6
OPGW-127[79.0;129.5] 36 15 537 79 129.5
OPGW-137[85.0;148.5] 36 15.6 575 85 148.5
OPGW-145[98.6;162.3] 48 16 719 98.6 162.3

 

Typical design for Three Layer:

Specification Fiber Count Diameter(mm) Weight (kg/km) RTS(KN) Short Circuit (KA2s)
OPGW-232[343.0;191.4] 28 20.15 1696 343 191.4
OPGW-254[116.5;554.6] 36 21 889 116.5 554.6
OPGW-347[366.9;687.7] 48 24.7 2157 366.9 687.7
OPGW-282[358.7;372.1] 96 22.5 1938 358.7 372.1
 Note:

1,Only a part of OPGWFiber Cable are listed in the table. More can be produce as required .

2,Cables can be supplied with a range of single mode or multimode fibers.

3,Specially designed Cable structure is available on request.

Packaging Details:

1-5KM per roll. Packed by steel drum . Other packing available according to client`s Request.

Sheath Mark:

The following printing(white hot foil indentation)is applied at 1meter intervals.

a. Supplier: Guanglian or as customer required;
b. Standard Code(Product Type, Fiber Type,Fiber Count);
c. Year of manufacture: 7 years;
d. Length marking in meters.

Port:

Shanghai/Guangzhou/Shenzhen

Lead Time:
Quantity(KM) 1-300 ≥300
Est.Time(Days) 15 To be begotiated!
Note:

The Packing standard and details as above is estimated and final size & weight shall be confirmed before shipment.

 

包装发货-OPGW

 

The cables are packed in carton, coiled on Bakelite & steel drum. During transportation, right tools should be used to avoid damaging the package and to handle with ease. Cables should be protected from moisture,kept away from high temperature and fire sparks,protected from over bending and crushing,protected from mechanical stress and damage.

Optical Cable Factory

In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.

GL  Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach  1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

https://www.gl-fiber.com/about-us/company-profile/

Send your message to us:

Write your message here and send it to us