Drop wire clamps for fiber optic cable is used to connect an overhead entrance fiber cable to an optical device of a house.
The drop wire clamp is composed of a body, a wedge and a shim.A solid wire bail is crimped to the wedge. All parts are made out of stainless steel.Fiber optic drop cable clamp made of stainless steel material.It furnished with a perforated gasket which increases the tension load on drop clamp without cable slip and damage,supply a long time usage life.The stainless steel wire can be used with drive hooks,pole brackets,FTTH brackets and other fiber optic cable fittings or hardware.
Features:
Used to support one and two pair telephone drop wire at span clamps, drive hooks, and various drop attachments.
Tail wires are formed from 430 Stainless Steel.
Stainless Steel Drop Wire Clamp has a serrated shim for increased hold on drop wire.
Stainless Steel Drop Wire Clamps are made from 304 Stainless Steel.
Drop Wire Clamps shall hold, without slippage, a suitable length of drop wire until sufficient load is applied to break the drop wire。
Installation:
1.Place the cable in the stainless steel drop wire clamps body.
2.Place the shim in the fiber optic drop cable clamp body over the cable,the grip side in contact with the cable.
3.Insert the wedge through the front of the body and pull to secure the cable.
