TheADSS fiber optic na USBTsarin tsiri da splicing kamar haka:
⑴.Cire kebul na gani kuma gyara shi a cikin akwatin haɗin.Shigar da kebul na gani a cikin akwatin tsaga kuma gyara shi, kuma ku tube kwasfa na waje.Tsawon tsiri yana da kusan 1m.Da farko a tuɓe shi a kwance, sannan a tuɓe shi a tsaye.A lokacin aikin splicing, zurfin da wuka mai tsiri ya yanke a cikin kebul na gani dole ne a kama shi da kyau.Kar a matse bututun da ba a kwance ba don haifar da damuwa da fiber na gani, balle ya lalata bututun dam.Cire kwasfa na waje, cire murfin matashin ciki da igiya mai cikawa, barin zaren aramid ɗin 3Ocm wanda aka yi wa lanƙwasa a cikin ƙwanƙwasa, ɗaure shi akan akwatin tsaga, sannan danna ƙarfafa cibiyar zuwa tsayin da ya dace daidai da girman splice ɗin. akwatin Akan akwatin mai haɗawa.Ka bar 20cm na kowane bututu mai sako-sako, yanke su da tarkacen waya na musamman, sa'an nan kuma cire fiber core a layi daya.
⑵.Yanke zaren da ba a sani ba, shafa man shafawa a gindin tare da tawul ɗin takarda da aka tsoma barasa, raba nau'ikan bututu daban-daban da zaruruwan launuka daban-daban, sannan ku wuce zaruruwan ta cikin bututun rage zafi.Yi amfani da ƙwanƙolin waya na musamman don cire murfin, sannan a goge zaren da ba a so tare da auduga mai tsabta wanda aka jika da barasa sau da yawa, sa'an nan kuma yanke zaren tare da madaidaicin fiber cleaver.
⑶.Don haɗin fiber na gani, kunna ƙarfin fusion splicer don fara zafi.Kafin yin gyare-gyaren fusion, zaɓi hanyar latsawa da ta dace daidai da fiber na gani da tsawon aiki da tsarin ke amfani da shi.Idan babu yanayi na musamman, ana amfani da hanyoyin walda ta atomatik gabaɗaya.Sanya fiber na gani a cikin tsagi mai siffar V na fusion splicer;a hankali danna maƙarƙashiyar fiber da maƙalar fiber;saita matsayi na fiber a cikin matsi bisa ga tsayin yankan fiber kuma rufe gilashin iska;za a iya kammala splicing ta atomatik.
⑷ Zazzage bututun zafi, buɗe gilashin iska, cire fiber na gani daga cikin fusion splicer, sa'an nan kuma sanya bututun da za a iya rage zafin zafi a kan ɓangaren fusion splicing na cibiyar fiber mara kyau, sannan a saka shi a cikin tanderun dumama don dumama.
⑸ Gyara ma'aunin fiber ɗin, kuma sanya zaren da ya rabu akan tiren karɓar fiber.Lokacin murɗa fiber ɗin, mafi girman radius na nada, mafi girman baka, kuma ƙarami asarar layin gaba ɗaya.Sabili da haka, dole ne a kiyaye wani radius don guje wa asarar da ba dole ba lokacin da aka watsa laser a cikin ainihin.Bayan an kulle akwatin haɗin gwiwa, sanya ƙugiya mai bakin karfe kuma rataye shi a kan wayar da aka rataye.
