banner

Single Sheath Non-metal Central Loose Tube Outdoor fiber Optic Cable(ADSS-S)

Single Layer Aerial ADSS Cable is idea for installation in distribution as well as transmission envirline installations are required as its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass.

Structural features: Single layer ,Loose tube stranding, Non-metal strength member, Half dry water-blocking, Aramid yarn strength member, PE outer jacket. 

Product Name: ADSS cable

Model: All Dielectric Self-supporting Aerial Cable

Application:

1.ADSS fiber cables are erect on the same pole with power line in new and old power line.
2. Mini or Short Span.
3.Areas of strong electric field, multi-thunder, etc

 

 

Description

Specification

Package & Tansportation

Application:

Self-Support Aerial installation,Outdoor;

Features:

Non-metal strength member
High Strength Kevlar yarn member
Replacing existing aerial ground wires
Upgrading communications lines of power systems
Synchronous planning and designing when new aerial power lines are to be constructed
Conducting large fault short-circuit current and providing lightning protection

Application:

Adopted to Outdoor distribution
Network in high electromagnetic interfering places
Suitable for aerial network
Long distance and local area network communication
Can be installed conveniently and operated simply

Write your message here and send it to us

Technical Parameter:

No. of cable / 6 12 24 48 72 96
Design(StrengthMember+Tube&Filler) / 1+5 1+5 1+5 1+5 1+6 1+8
Fiber type / G.652D

Central Strength Member

Material mm FRP
Diameter(±0.05mm) 1.5 1.5 1.5 1.5 2.1

2.1

Loose Tube

Material mm PBT

Diameter

(±0.05mm)

1.8 1.8 1.8 2.1 2.1 2.1
Thickness(±0.03mm) 0.32 0.32 0.32 0.35 0.35

0.35

MAX.NO./per 6 6 6 12 12 12
Filler Rope Material mm LDPE
Diameter(±0.05mm) 1.8 1.8 1.8 2.1
NO. 4 3 1 1
Water Blocking Layer Material / Flooding Compound& Water Blocking tape
Additional Strength Member Material / Aramid Yarn
Outer Sheath Material mm MDPE
Thickness 1.8(nominal)
colour black.
Cable Diameter(±0.2mm) mm 9.6 9.6 9.6 10.2 10.8 12.1
Cable Wetght(±10.0kg/km) kg/km 67 67 67 78 87 116
Attenuation coefficient 1310nm dB/km ≤0.35
1550nm ≤0.21
Cable breaking strength(RTS) kn ≥5.8

Working Tension (MAT)

kn ≥2.2
Wind velocity m/s 30
Icing mm 5
Span m 200
Crush Resistance Short Term N/100mm ≥2200
Long Term ≥1100
Min. bending radius Without Tension mm 10.0×Cable-φ
Under Maximum Tension 20.0×Cable-φ
Temperature range(℃) Installation -20~+60
Transport&Storage -40~+70
Operation -40~+70

Packing and Marking

  • Each single length of cable shall be reeled on Fumigated Wooden Drum
  • Covered by plastic buffer sheet
  • Sealed by strong wooden battens
  • At least 1 m of inside end of cable will be reserved for testing.
  • Drum length: Standard drum length is 3,000m±2%; as required
  • 5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
  • Manufacturing year and month Roll—direction arrow;
  • Drum length; Gross/net weight;

 

Packaging and Shipping

Packaging & Shipping

Send your message to us:

Write your message here and send it to us