OPGW Typical Designs of Stranded Stainless Steel Tube

OPGW Mainly used for power communication with accessories,relay protection,automatic transmission,installation together with high-voltage lines.

The Stranded Optical Ground Wire (OPGW) is stranded by double or three layers of aluminum clad steel wires(ACS) or mix ACS wires and aluminum alloy wires, Its design is fully adapted to the most common electric line needs.


Fiber Type: Fiber Type: G652D; G655C; 657A1; 50/125; 62.5/125; OM3; OM4 As Options

Application: Aerial , Overhead , Outdoor

Typical Design: Stranded Stainless Steel Tube Type



Package & Tansportation

Our Advantages



Aerial , Overhead , Outdoor


1,High quality standards for designing, testing and producing with grade A materials available to ensure long-term reliability.

2,Engineering support supervising and providing its own line of accessories hardware .

3,Larger tensile strength and fault current capacity to reach a better balance of electrical and mechanical performance.

 Advantages of GL OPGW fiber optic cable:

1,Three typical designs: central tube,stranded wire,PBT loose tube;

2,200km OPGW cable regular production time about 20 days;

3,Type test including salt corrosion,suitable in harsh corrosive environment,especially near the sea.

OPGW has two fiber type : one is single mode G652D , and the other is G655 , sometimes they mixed together , such like OPGW-36B1+12B4-93 [78.8;53.9] . Fiber optic cable OPGW, usually 12~48 fibers,GL can max produced 96 fibers OPGW fiber optic cable, jelly filled and fiber contained central PBT loose/aluminum cladding steel/aluminum tube, outer with AA/ACS wires armored, detailed specification on your request.

ITU-TG.652 Characteristics of a single mode optical fiber.
ITU-TG.655 Characteristics of a non-zero dispersion -shifted single mode fibers optical.
EIA/TIA598 B Col code of fiber optic cables.
IEC 60794-4-10 Aerial optical cables along electrical power lines-family specification for OPGW.
IEC 60794-1-2 Optical fiber cables -part test procedures.
IEEE1138-2009 IEEE Standard for testing and performance for optical ground wire for use on electric utility power lines.
IEC 61232 Aluminum -Clad steel wire for electrical purposes.
IEC60104 Aluminum magnesium silicon alloy wire for overhead line conductors.
IEC 6108 Round wire concentric lay overhead electrical stranded conductors.

  • Previous:
  • Next:

  • Technical Parameter

    Typical design for Double Layer:

    Specification Fiber Count Diameter(mm) Weight (kg/km) RTS(KN) Short Circuit (KA2s)
    OPGW 89[55.4;62.9] 24 12.6 381 55.4 62.9
    OPGW-110[90.0;86.9] 24 14 600 90 86.9
    OPGW-104[64.6;85.6] 28 13.6 441 64.6 85.6
    OPGW-127[79.0;129.5] 36 15 537 79 129.5
    OPGW-137[85.0;148.5] 36 15.6 575 85 148.5
    OPGW-145[98.6;162.3] 48 16 719 98.6 162.3


    Typical design for Three Layer:

    Specification Fiber Count Diameter(mm) Weight (kg/km) RTS(KN) Short Circuit (KA2s)
    OPGW-232[343.0;191.4] 28 20.15 1696 343 191.4  
    OPGW-254[116.5;554.6] 36 21 889 116.5 554.6  
    OPGW-347[366.9;687.7] 48 24.7 2157 366.9 687.7  
    OPGW-282[358.7;372.1] 96 22.5 1938 358.7 372.1  

    1,Only a part of OPGWFiber Cable are listed in the table. More can be produce as required .

    2,Cables can be supplied with a range of single mode or multimode fibers.

    3,Specially designed Cable structure is available on request.

    Packaging Details:

    1-5KM per roll. Packed by steel drum . Other packing available according to client`s Request.

    Sheath Mark:

    The following printing(white hot foil indentation)is applied at 1meter intervals.

    a. Supplier: Guanglian or as customer required;
    b. Standard Code(Product Type, Fiber Type,Fiber Count);
    c. Year of manufacture: 7 years;
    d. Length marking in meters.



    Lead Time:
    Quantity(KM) 1-300 ≥300
    Est.Time(Days) 15 To be begotiated!

    The Packing standard and details as above is estimated and final size & weight shall be confirmed before shipment.




    The cables are packed in carton, coiled on Bakelite & steel drum. During transportation, right tools should be used to avoid damaging the package and to handle with ease. Cables should be protected from moisture,kept away from high temperature and fire sparks,protected from over bending and crushing,protected from mechanical stress and damage.

    1.We are the one of biggest manufacture of fiber optic cable in China and has more than 25 years manufacturing and selling experience.Only producing grade a quality fiber optic cable

    2.We are specialized in all kinds of fiber optic cable and  related hardware, such as ADSS, OPGW, FTTH and so on.The company has achieved quality certificate ISO9001.

    3.GL is manufacturer over 16 years, which having professional sales team, R&D department and technology department.

    4.We accept OEM. The fiber cable size and material are customized.Your own logo and own design are welcome.We will produce according to your requirment and description;

    5.Please send us inquiry for more products info and we will give you feedback in 12 hours.

    6. Flexible payment terms: T/T, L/C, Paypal and so on.

    Send your message to us:

    Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us