banner

Self-supported ASU Fiber Optic Cable (2-12F)

G.652D Aerial Self-Supported ASU Fiber Optic Cable has a loose tube structure and water-resistant gel compound to provide crucial protection for the fiber. Over the tube, water-blocking material is applied to keep the cable watertight. Two parallel fiber reinforced plastic (FRP) elements are placed on the two sides. The cable is covered with a single PE outer sheath. It is especially suitable for installation in aerial for long-distance communication

Structure: Single loose tube construction, jelly compound filled, then PE outer sheath with two non-metallic strength members combined.

Fiber Count: 2-12 Core;

Span: 80m or 120m;

 

Description

Specification

Package & Tansportation

Structure Design:

asu

Features:

  • Max. core: 12
  • Small volume, light weight, stable structure
  • All dielectric, anti-thunder, anti-electromagnetic interference
  • Superior mechanical and environment performance

Application:

  • Aerial installation
  • Duct installation
  • Indoor access

Installation Performance:

Min. bend radius: installation 20D, operation 10D

Temperature range: storage -40℃~+70℃, installation -20℃~+60℃, operation -40℃~+70℃

 

Write your message here and send it to us

Cable structure and parameter:

SN Item Unit Value
1 No. of fibers count 2/4/6/8/12
2 FRP diameter(nominal) mm 2
3 Cable diameter(±5%) mm 6.6
4 Cable weight(±10%) kg/km 42
5 Tension N 1600/800
6 Crush N/100mm 1000/300

Characteristic of Optical Cable:

Min. bending radius for installation

Static: 15 x cable diameter

Dynamic: 30 x cable diameter

Application temperature range:

Operation: – 20℃ ~ +65℃

Installation: -10℃ ~ +60℃

Storage/transportation: – 20℃ ~ +65℃

 Main mechanical & environmental performance test:

Item Test Method Acceptance Condition
Tensile Strength - Load: Short term tension - Fiber strain  £ 0.33%
IEC 60794-1-2-E1 - Length of cable: about 50m - No fiber break and no sheath damage.
  - Load time: 1min  
Crush Test - Load: Short term crush - Loss change  £ 0.1dB@1550nm
IEC 60794-1-2-E3 - Load time: 1min - No fiber break and no sheath damage.
Temperature Cycling - Temperature: -20oC~+60oC - Loss change  £ 0.1dB/km@1550nm
IEC 60794-1-2-F1 - Time of each step: 12h - No fiber break and no sheath damage.
  - Number of cycles: 2  

Packing and Marking

  • Each single length of cable shall be reeled on Fumigated Wooden Drum
  • Covered by plastic buffer sheet
  • Sealed by strong wooden battens
  • At least 1 m of inside end of cable will be reserved for testing.
  • Drum length: Standard drum length is 3,000m±2%; as required
  • 5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
  • Manufacturing year and month Roll—direction arrow;
  • Drum length; Gross/net weight;

Packaging and Shipping:

Packaging & Shipping

Send your message to us:

Write your message here and send it to us