1-12 Core GJYXCH/GJYXFCH Outdoor FTTH Drop Cable

1-12 Core FTTH Drop Cable Self-Support GJYXFCH SM 9/125 OS2 G657A2 with 2 FRP in Parallel As Strength member A steel wire or KFRP As Strength member LSZH The drop FTTH cables are with flame retardant jacket and with supporting wire, there are strengthen members inside the cables for supporting the whole cables. The optical fiber cable is with special structure so it is easy to pull the fibers out from the cables.

Application: Outdoor;Self-supporting

1. High performance optical network operating.
2. High speed optical routes in buildings (FTTX).
3. All types of fiber cables with different structures.




Package & Tansportation

The typical GJYXFCH/GJYXCH self-supporting bow-type drop optical cable consists of GJXFH/GJXH cable and an additional strength member (steel wire or stranded steel wire).

Comply with standard YD/T1997-2009

  1. Special low-bend-sensitivity fiber provides high bandwidth and excellent communication transmission property.
  2. Two parallel FRP strength members ensure good performance of crush resistance to protect the fiber.
  3. Single steel wire as the additional strength member ensure good performance of tensile strength.
  4. Simple structure, light weight and high practicability.
  5. Novel flute design. easily strip and splice, simplify the installation and maintenance.
  6. Low smoke, zero halogen and flame retardant sheath.

1)on fiber type G652D or G657A,Pls note that drop cable usually using G657A Fiber, because G657A Fiber have more small bending radius than G652D,Even both type fiber have same grade attenuation. But Drop cable using for FTTX project, and this project require some point with very small bending radius. If you using G652D will cause too big attenuation or fiber will broke if you bend too small radius .please understand it is very important on this issue.

2)On the center strength member, better using FRP  .

FTTH Drop Cable Self-Support GJYXFCH SM 9/125 OS2 G657A2 with 2 FRP in Parallel As Strength member A steel wire or KFRP As Strength member LSZH Jacket Structure

flame-retardant LSZH jacket
FRP strength member
A steel wire or KFRP As Strength member
for FTTH OUT Door cabling.

Drop Cable FTTH
LSZH Low Somoke, Zero Halogen. LSZH Grade A, Flame Resistance Resistant property. Suitability for working to direct sunlight exposure Without Messenger FRP Strength Member, Fiber Reinforced Plastic G657 Singlemode Fiber Optic ITU‐T G657A2 Subcategory, appropriate for a minimum design radius of 7.5 mm.
Marking: OEM

Product Length: 1000 m/Drum
Certificate: Should be included for all Wood packing
Application: Indoor Use


2000m/ Wooden Drum
1 Drum/ Carton
Wooden Drum Size: 40cm
(Diameter) * 32cm (Height)
Carton Size: 42*42*34cm

Packaging & Labeling

Package 1 is usually for indoor, light weight cables.wight around 10Kg/Km(1 km Dram or 2 Km Dram)

Package 2 is usually for outdoor, heavy weight cables.

Write your message here and send it to us

We only attach Test Report on the out package of the cable, but we could also mark as your requirements.

  Optical Characteristics:
     Fiber Sort       Multimode     G.651    A1a:50/125  Graded-index fiber
     Singlemode     G.652(A、B、C)  B1.1:Conventional fiber
    G.652D  B2: Zero  dispersion shifted
    G.655  B1.2 :Cut- off wavelength shifted
    G.657(A1、A2 、B3)  B4: Main technical data for positive
dispersion shifted single-mode fiber
Packaging Details:

Packed by Plywood and Carton.

Sheath mark:

The following printing(white hot foil indentation)is applied at 1meter intervals.

a. Supplier: Guanglian or as customer required;
b. Standard Code(Product Type, Fiber Type,Fiber Count);
c. Year of manufacture: 7 years;
d. Length marking in meters.

Lead Time:
Quantity(KM) 1-300 ≥300
Est.Time(Days) 15 To be begotiated!
Package of FTTH Drop Cable
No Item Index
Outdoor Drop Cable Indoor Drop Cable Flat Drop Cable
1 Length and packaging 1000m/Plywood Reel 1000m/Plywood Reel 1000m/Plywood Reel
2 Plywood reel size 250×110×190mm 250×110×190mm 300×110×230mm
3 Carton size 260×260×210mm 260×260×210mm 360×360×240mm
4 Net weight 21 kg/km 8.0 kg/km 20 kg/km
5 Gross weight 23 kg/Box 9.0 kg/Box 21.5 kg/Box

Package & Shipping:

How to choose an economical and practical cable drum packaging to drop cable? Especially in some countries with rainy weather like Ecuador and Venezuela, Professional FOC manufacturers recommend that you use the PVC inner drum to protect the FTTH Drop Cable. This drum is fixed to the reel by 4 screws , Its’ advantage is drums are not afraid of rains & the cable winding is not easy to loosen. The following are the construction pictures fed back by our end customers. After the installation is completed, the reel is still firm and intact.

ftth-drop-cable-packaging-pvc drum

Our Ecuador Project Construction Photo Sharing:

FTTH Drop Cable Project In Ecuador

Send your message to us:

Write your message here and send it to us