48 Core Non Metallic ADSS Optic Cable For 120M Span

GL Fiber Mini-Span All-Dielectric Self Supporting (ADSS) fiber optic cable is designed for outside plant aerial and duct applications in local and campus network loop architectures. Mini-Span includes fiber counts up to 144 optical fibers and any type of combination of single-mode and laser-optimized multimode fibers with the cable.

Model: GL Fiber ADSS Cable, Single jacket, 2~144F;
Fiber Type: ITU G652D, G657A, OM1, OM2, OM3, OM4;
Fiber counts: 2-144 core is available;
Span: 50M ~200M.
Standard: IEC 60794-4、 IEC 60793、TIA/EIA 598 A ;

Send email to us Open Whats App

Description

Specification

Package & Shipping

Factory Show

Leave Your Feedback

Structure Design:

Main Feature:

1. Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication；
2. Track -Resistant outer jacket available for the high voltage (≥35KV); HDPE outer jacket available for the high voltage (≤35KV)；
3. Excellent AT performance. The maximum inductive at the operating point of AT jacket can reach 25kV.
4. Gel-Filled buffer tubes are S-Z stranded;
5. Can be installed without shutting off the power.
6. Light weight and small diameter reducing the load caused by ice and wind and the load on towers and backprops.
7. Good performance of tensile strength and temperature.
8. The design life span is over 30 years.

Standards:

GL Fiber's ADSS Fiber Optical Cable complies with IEC 60794-4, IEC 60793, TIA/EIA 598 A standards.

Advantages of GL Fiber' ADSS Optical Fiber Cable:
1.Good aramid yarn have excellent tensile performance;
2.Fast delivery, 200km ADSS cable regular production time about 10 days;
3.Can using glass yarn instead of aramid to anti rodent.

Colors -12 Chromatography:

Fiber Optic Characteristics:

		G.652	G.655	50/125μm	62.5/125μm
Attenuation (+20℃)	@850nm			≤3.0 dB/km	≤3.0 dB/km
	@1300nm			≤1.0 dB/km	≤1.0 dB/km
	@1310nm	≤0.00 dB/km	≤0.00dB/km
	@1550nm	≤0.00 dB/km	≤0.00dB/km
Bandwidth（Class A）	@850nm			≥500 MHz·km	≥200 MHz·km
Bandwidth（Class A）	@1300nm			≥500 MHz·km	≥500 MHz·km
Numerical aperture				0.200±0.015NA	0.275±0.015NA
Cable Cutoff Wavelength		≤1260nm	≤1480nm

Typical Technical Parameter of ADSS Cable:

Part code	ADSS-DJ-120M-48F
Number of Fibers	Unit	12core
Number of fiber in tube	Nos	12
Number of loose tube	Nos	4
Number of dummy filler	Nos	1 or 2
Central strength member	Material	FRP
Loose tube	Material	PBT
peripheral strength member	Material	Aramid yarn
Water block	Material	Water swellable tape and water block yarn
Outer sheath	Material	HDPE
Cable nominal Diameter	MM ±0.2	10.4
Cable nominal weight	Kg/Km ±5	85
Max. Allowable tension Load	N	2500
Span		Suitable for 120 span
Max. crush resistance	N	2000 (Short term) / 1000 (Long term)
Min. bending radius		At full load 20 x Cable OD (including poles) At no load 15 x Cable OD
Temperature range		Installation -0 -> +50 Operation -10 -> +70

Remarks:

Detail requirements need to be sent to us for ADSS cable design and price calculation. Below requirements are a must:
A, Power transmission line voltage level
B, fiber count
C, Span or tensile strength
D, weather conditions

How to Ensure the Quality and Performance of Your Fiber Optic Cable?
We control the products quality from the raw material to the finish produts All the raw material should be tested to match the Rohs standard when they arrived at our manufacture.We control the quality during the producing process by advanced technology and equipments. We test the finished products according to the test standard. Approved by various professional optical and communication product institution , GL also conduct various in-house testing in its own Laboratory and Test Center. We also conduct test with special arrangement with the Chinese Government Ministry of Quality Supervision & Inspection Center of Optical Communication Products(QSICO).

Quality Control - Test Equipment and Standard:

Feedback: In order to meet the world’s highest quality standards, we continuously monitor feedback from our customers. For comments and suggestions, please, contact us, Email: [email protected].

Write your message here and send it to us

ADSS Single Jacket All-Dielectric Self-Supporting Fiber optic cable is idea for installation in distribution as well as transmission envirline installations are required as its name indicates, there is no support or messenger wire required, so installation is achieved in a single pass.Structural features:Single layer ,Loose tube stranding, Non-metal strength member, Half dry water-blocking, Aramid yarn strength member, PE outer jacket. Includes 2 core, 4 core, 6 core, 8 core, 12 core, 16 core, 24 core, 36 core, 48 core, 96 core, up to 144 core.

2-144 Core Single Jackets ADSS Cable Specifications:

Cable fiber count		/	2~30	32~60	62~72	96	144
Structure		/	1+5	1+5	1+6	1+8	1+12
Fiber style		/	G.652D
Central strength member	material	mm	FRP
Central strength member	Diameter (average)	mm	1.5	1.5	2.1	2.1	2.1
Loose Tube	Material	mm	PBT
	Diameter (average)		1.8	2.1	2.1	2.1	2.1
	Thickness(average)		0.32	0.35	0.35	0.35	0.35
	Max fiber/loose tube		6	12	12	12	12
	Tubes color		Full color identification
	Fiber excess length	%	0.7~0.8

Water resistance	Material	/	Cable jelly + water resistant layer
Non-metallic strengthen components	Material	/	Aramid Yarn
Outer sheath	material	mm	MDPE
	Outer sheath		1.8mm
Cable diameter(average)		mm	9.6	10.2	10.8	12.1	15
Cable weight (Approximate)		kg/km	70	80	90	105	125
Cable Sectional area		mm2	72.38	81.72	91.61	115	176.7
Attenuation coefficient(Max)	1310nm	dB/km	0.35
	1550nm		0.21
Rated Tensile Strength(RTS)		kn	5.8
Max allowed tension( MAT)		kn	2.2
Annual average operating tension (EDS)		kn	3.0
Young’s modulus		kn/mm2	7.6
Coefficient of thermal expansion		10-6/℃	9.3
Crush resistance	Long term	N/100mm	1100
	Short term		2200
Permission Bent Radius	static	mm	15 of OD
	dynamic		20 of OD
Temperature	When laying	℃	-20~+60
	Storage and transportation		-40~+70
	runing		-40~+70
Scope of application	Suitable for voltage level under 110kV, wind speed below 25m/s, icing 5mm
Cable Marks	Company Name ADSS-××B1-PE-100M DL/T 788-2001 ××××M Year （Or at customer’s request）

What will affect the price of ADSS?

All Dielectric Self Supporting ADSS Cable is laid next to the power cable, so the material of the outer sheath needs to be designed according to the voltage. If it exceeds 110KV, it needs to use AT material, and if it is less than 110KV, it will use PE material.

The wind speed at the laying site, the thickness of the ice, the average temperature, and the most important span (the span refers to the distance between two utility poles) will all affect the tensile strength of the ADSS. If the tensile strength is not enough, the optical cable will be easily to be pulled off.

Finally, the customer should inform the number of fibers of the required ADSS cable, so that our engineer can design the ADSS according to the requirements.

Fiber Type	□ Single Mode B1-G.652D-9/125mm □ Single Mode B4-G.655 □ Multi Model A1a-50/125mm □ Multi Model A1b-62.5/125mm □ Or Customer Specified
Fiber Cores	□ 2Cores □ 4Cores □ 6Cores □ 8Cores □ 12Cores □ 24Cores □ 36Cores □ 48Cores □ 72Cores □ 96Cores □ 144Cores □ Or Customer Specified
Installation Span	□ 50Meter □ 80Meter □ 100Meter □ 120Meter □ 150Meter □ 200Meter □ 250Meter □ 300Meter □ 400Meter □ 600Meter □ Or Customer Specified
Max. Allowable Tension	□ 4KN □ 6KN □ 9KN □ 12KN □ 15KN □ 18KN □ 19KN □ 21KN □ 24KN □ 26KN □ 27KN □ Or Customer Specified
Sheath / Jacket (Materials)	□ PE □ AT	Voltage grade: <110KV Voltage grade: >110KV
Max. Wind Speed	How Many Meters Per Second
Max. thickness of ice coverage	Winter Max. thickness of ice coverage
Max., Min., Avg. temperature	-℃~+℃

Packing Material:

Non-returnable wooden drum.
Both ends of the fiber optic cables are securely fastened to the drum and sealed with a shrinkable cap to prevent ingress of moisture.
• Each single length of cable shall be reeled on Fumigated Wooden Drum
• Covered by plastic buffer sheet
• Sealed by strong wooden battens
• At least 1 m of inside end of cable will be reserved for testing.
• Drum length: Standard drum length is 3，000m±2%;

Cable printing:

The sequential number of the cable length shall be marked on the outer sheath of the cable at an interval of 1meter ± 1%.

The following information shall be marked on the outer sheath of the cable at an interval of about 1 meter.

1. Cable type and number of optical fiber
2. Manufacturer name
3. Month and Year of Manufacture
4. Cable length

Length&Packing	2KM	3KM	4KM	5KM
Packing	wooden drum	wooden drum	wooden drum	wooden drum
Size	900750900MM	10006801000MM	10907501090MM	12907201290
Net weight	156KG	240KG	300KG	400KG
Gross weight	220KG	280KG	368KG	480KG

Remarks：The reference cable diameter 10.0MM and the span 100M. For specific specifications, please ask the sales department.

Drum marking:

Each side of every wooden drum shall be permanently marked in a minimum of 2.5~3 cm high lettering with the following:

1. Manufacture name and logo
2. Cable length
3. Fiber cable types and number of fibers,etc
4. Rollway
5. Gross and net weight

Optical Cable Factory

In 2004, GL FIBER established the factory to produce optical cable products, mainly producing drop cable, outdoor optical cable, etc.

GL Fiber now have 18 sets of coloring equipments, 10 sets of secondary plastic coating equipments, 15 sets of SZ layer twisting equipments, 16 sets of sheathing equipments, 8 sets of FTTH drop cable production equipments, 20 sets of OPGW optical cable equipments, and 1 paralleling equipment And many other production auxiliary equipments. At present, the annual production capacity of optical cables reaches 12 million core-km (average daily production capacity of 45,000 core km and kinds of cables can reach 1,500 km) . Our factories can produce various types of indoor and outdoor optical cables ( such as ADSS, GYFTY, GYTS, GYTA, GYFTC8Y, air-blown micro-cable, etc.). the daily production capacity of common cables can reach 1500KM/day, the daily production capacity of drop cable can reach max. 1200km/day, and the daily production capacity of OPGW can reach 200KM/day.