banner

24 Core Single Layer All-Dielectric Self-Supporting ADSS Optical Cable

GL Mini-Span All-Dielectric Self Supporting (ADSS) fiber optic cable is designed for outside plant aerial and duct applications in local and campus network loop architectures. Mini-Span includes fiber counts up to 144 optical fibers and any type of combination of single-mode and laser-optimized multimode fibers with the cable.

Pole-to-Pole span lengths range from 50 m to over 150 m. Custom ADSS design options allow span lengths of over one mile (5,280 feet)

Structural features: Single layer ,Loose tube stranding, Non-metal strength member, Half dry water-blocking, Aramid yarn strength member, PE outer jacket. 

Model: All Dielectric Self-supporting Aerial Cable

Application:

1.ADSS fiber cables are erect on the same pole with power line in new and old power line.
2. Mini or Short Span.
3.Areas of strong electric field, multi-thunder, etc

 

 

Description

Specification

Package & Tansportation

Fiber Type: G652D; G655C; 657A1; 50/125; 62.5/125; OM3; OM4 As Options

Span: 50 feet to over 1000 feet.

Application: Self-support Aerial installation

Main Feature:

1.Suitable for use on distribution and high voltage transmission lines with mini spans or self supporting installation for telecommunication ;
2.Track -Resistant outer jacket available for the high voltage;
3.Line where space potentials up to 35kv;
4.Gel-Filled buffer tubes are S-Z stranded;
5.Instead of Aramid yarn or glass yarn,there is no support or messenger wire required. Aramid yarn is used as the strength member to assure the tensile and strain performance for mini span (usually below 100 meters) ;
6.The fiber counts from 4-288 fibers.

Standrads: IEEE 1222, IEC 60794-4-20, ANSI/ICEA S-87-640, TELCORDIA GR-20, IEC 60793-1-22, IEC 60794-1-2, IEC 60794 standards

Write your message here and send it to us

Technical Parameter: 

Span (meter) Weight(kg/km) Diameter(mm) Initial Tension (N)Unload/Load
12 Fibers        
50 110 9.0~10.5 892 1479
100 110 9.0~10.5 1338 2043
150 110 9.0~10.5 2232 3286
200 110 12.2 3280 4800
24 Fibers        
50 115 9.0~10.5 904 1486
150 115 9.0~10.5 2261 3304
200 115 12.2 3322 4826

Packing and Marking

  • Each single length of cable shall be reeled on Fumigated Wooden Drum
  • Covered by plastic buffer sheet
  • Sealed by strong wooden battens
  • At least 1 m of inside end of cable will be reserved for testing.
  • Drum length: Standard drum length is 3,000m±2%; as required
  • 5.2 Drum Marking(can according to the requirement in the technical specification) Manufacturer name;
  • Manufacturing year and month Roll—direction arrow;
  • Drum length; Gross/net weight;

 

Packaging and Shipping

Packaging & Shipping

Send your message to us:

Write your message here and send it to us